About winaa

Basic Information


Date of Birth
January 12
About winaa
Location:
Rotorua

Signature


BC doesn't matter, until you need to dial

Statistics


Total Posts
Total Posts
474
Posts Per Day
0.16
General Information
Last Activity
08-03-2024 06:16 PM
Join Date
24-04-2016
Referrals
0

336 Likes

  1. winaa
    winaa liked post by K95 On thread : All about gas stoves.
    Part 1 - Gas. Gases boil at different temperatures. When a gas goes above it's 'boiling point' it will change state from a liquid to a vapour. Our stoves require a minimum pressure difference...
    Liked On: 12-04-2020, 06:58 PM
  2. winaa
    winaa liked post by chainsaw On thread : Z5/VX5 etc
    Photo of Z5 wearing the 2 turn turret attached 135816
    Liked On: 11-04-2020, 05:43 PM
  3. winaa
    winaa liked post by southernman On thread : 7mm sectioned projectiles
    135067 One of my favorite hunting bullets, goes good in my double rifle 7x57R
    Liked On: 05-04-2020, 09:41 PM
  4. winaa
    winaa liked post by ebf On thread : Have a look at these ballistics for me please
    This is the format I use for field/gong comps It happens to be my hunting loads (14 inch barrel), hence out to 500 max 135109 The way to use it is to range the target, and then work from...
    Liked On: 05-04-2020, 07:42 PM
  5. winaa
    winaa liked post by ebf On thread : Have a look at these ballistics for me please
    135108
    Liked On: 05-04-2020, 07:40 PM
  6. winaa
    winaa liked post by 7x64 On thread : 7mm sectioned projectiles
    134908 162 Amax, in case someone hasn’t done one yet.
    Liked On: 03-04-2020, 09:51 PM
  7. winaa
    winaa liked post by andyanimal31 On thread : Kestrel elite and accuracy first
    That's what the solutions look like The speed drop is what ever your range is in metres just deduct 1.8 and that gives you the correct elevation adjustment or hold between 246m And 645m. Pretty...
    Liked On: 03-04-2020, 10:19 AM
  8. winaa
    winaa liked post by Mathias On thread : 7mm sectioned projectiles
    As I mentioned earlier, I said the old 30cal 150BT was shocking, too soft. Interesting to see your photo of the current bullet sectioned compared to the one's I used in the 1990's. Nosler obviously...
    Liked On: 01-04-2020, 01:22 PM
  9. winaa
    winaa liked post by mikee On thread : 7mm sectioned projectiles
    Not 7mm but I got bored so thought would give sectioning a crack! Top is .30Cal 200gn ELD-X, Middle is 175gn TLR and bottom is un-cut 175gn TLR 134558 my sectioning is not as good as the...
    Liked On: 31-03-2020, 11:58 AM
  10. winaa
    winaa liked post by nick On thread : 7mm sectioned projectiles
    120gr BT's hold together much better than 150gr,i have tried many different bullets in 7mm08 and still to find a better preforming one
    Liked On: 30-03-2020, 03:52 PM
  11. winaa
    winaa liked post by Flyblown On thread : .270 140 game kings exploding
    Yes please do winaa. I got pretty close to perfecting the section process by using some very fine files to finish them, worked really well. I also set up a proper camera and lighting so I could...
    Liked On: 27-03-2020, 07:13 PM
  12. winaa
    winaa liked post by Flyblown On thread : .270 140 game kings exploding
    Just a comment about the GameKing vs the Pro-Hunter. When it comes to the construction they are made on the same machines using the same materials and the same process. I have an interesting email...
    Liked On: 27-03-2020, 05:49 PM
  13. winaa
    winaa liked post by Wingman On thread : RL16 in 308?
    Ive tried it Gibo , its is very much like 2209 which was listed in the old ADI manuals for heavy .308 bullets but has now been removed in newer publications. RL16 maybe a bit faster but bulkier...
    Liked On: 19-03-2020, 07:17 AM
  14. winaa
    winaa liked post by Flyblown On thread : .243 uses
    Have shot the .243 Win for almost 40 yrs. What I found time and time again is that after dicking around experimenting, I always come back to a flat base 100gr softpoint. Sierra ProHunter these...
    Liked On: 17-03-2020, 07:00 AM
  15. winaa
    winaa liked post by Flyblown On thread : New DPT Hunter chassis
    It is a shame Nick that you guys can’t expand the range for these Hunter chassis. But I totally understand the economics of that, these days. I love mine and wouldn’t swap it for anything. I did...
    Liked On: 16-03-2020, 07:29 AM
Page 5 of 5 FirstFirst 12345

07-09-2016



Page 5 of 5 FirstFirst 12345
No results to display...
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!