Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...
Liked On: 22-02-2020, 11:39 AM
Dama dama Shes all finished.. although it could do with the barrel being dumped in a hot blue tank which I will have done at some stage to give it a darker more durable blue than my make shift cold...
Liked On: 21-02-2020, 08:34 PM
Dama dama Shes all finished.. although it could do with the barrel being dumped in a hot blue tank which I will have done at some stage to give it a darker more durable blue than my make shift cold...
Liked On: 21-02-2020, 08:19 PM
Dama dama Shes all finished.. although it could do with the barrel being dumped in a hot blue tank which I will have done at some stage to give it a darker more durable blue than my make shift cold...
Liked On: 21-02-2020, 08:09 PM
Dama dama Shes all finished.. although it could do with the barrel being dumped in a hot blue tank which I will have done at some stage to give it a darker more durable blue than my make shift cold...
Liked On: 21-02-2020, 08:07 PM
There seems to be a few fans of these M85 Zastavas so I thought Id share this little rebuild. 130541 Technically this one is a Interarms MarkX but its just a Zastava in a prettier stock and...
Liked On: 21-02-2020, 07:38 PM
Get brave, go 16.5" run any of the large range of 130gr bullets with BM-8208 https://youtu.be/b32w6CWWn2U 6.5x47 Lapua would probably do better than Creedmoor
Liked On: 19-02-2020, 07:26 AM
19" Creedmoor with 147gr ELDM @2750fps and a 14.5" Grendel with 123gr @ 2450fps both shoot great. The Creedmoor has dropped reds out past 500m no probs
Liked On: 17-02-2020, 09:03 PM
Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...
Liked On: 15-02-2020, 08:09 AM
So the MAB barrel blank I selected is a 25" long 4140 CM 1-10" twist light Sako contour in a .308" bore diameter. The profile was a fraction lighter than the Zastava barrel but I am planning to my...
Liked On: 15-02-2020, 08:09 AM
Before I got started on the new 7.62x39 barrel I had a .22 grendel itch I had to scratch.. I had a very short trueflite 1-8" twist .223Rem take off barrel that I wanted to test the .22 Grendel...
Liked On: 15-02-2020, 08:04 AM
Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...
Liked On: 14-02-2020, 06:48 PM
Nah it was propper fuct.. I gave it a good scrub and bore lap but the grooves have receded from the original groove dimension of .311/.310" to .323" :wtfsmilie: so it may have shot 8mm projectiles...
Liked On: 14-02-2020, 06:38 PM
Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...
Liked On: 14-02-2020, 06:35 PM
Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...
Liked On: 14-02-2020, 06:30 PM