Wingman
Member

2341 Likes

Page 83 of 157 First ... 336970717273747576777879808182838485868788899091929394959697133 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by Wingman On thread : 6mm Creedmoor goats and deer

   Its "retained" velocity. While the .243 can match the muzzle velocity of the 6mm creedmoor when loaded equally, the off the shelf .243 win is limited to 95-100gr bullets because it is normally...

   Liked On: 06-06-2020, 12:19 AM

2. 
   takbok liked post by Wingman On thread : New 6mm ARC from Hornady

   Its a renamed 6mm Grendel. I have the reamer and a CZ 527 barrel chambered in it if you want to test shoot it. You can use a 6.5 Grendel bushing die with a 6mm neck bush to resize them. I also...

   Liked On: 04-06-2020, 07:11 PM

3. 
   Steelisreal liked post by Wingman On thread : New 6mm ARC from Hornady

   I stand corrected.. In true Hornady fashion they have not just necked down a grendel case. To maximize on factory ammo, dies and brass sales they have made the base to shoulder dimension shorter...

   Liked On: 04-06-2020, 06:12 PM

4. 
   Spoon liked post by Wingman On thread : New 6mm ARC from Hornady

   Speed, higher BC and retained energy. Equal bullet weight comparison as follows: 6.5 grendel with 107gr TMK, 2550fps 6mm grendel with 108gr ELDM 2700fps

   Liked On: 04-06-2020, 05:50 PM

5. 
   kiwi-adam liked post by Wingman On thread : New 6mm ARC from Hornady

   Its a renamed 6mm Grendel. I have the reamer and a CZ 527 barrel chambered in it if you want to test shoot it. You can use a 6.5 Grendel bushing die with a 6mm neck bush to resize them. I also...

   Liked On: 04-06-2020, 12:05 PM

6. 
   GWH liked post by Wingman On thread : New 6mm ARC from Hornady

   Its a renamed 6mm Grendel. I have the reamer and a CZ 527 barrel chambered in it if you want to test shoot it. You can use a 6.5 Grendel bushing die with a 6mm neck bush to resize them. I also...

   Liked On: 04-06-2020, 11:34 AM

7. 
   winaa liked post by Wingman On thread : New 6mm ARC from Hornady

   Its a renamed 6mm Grendel. I have the reamer and a CZ 527 barrel chambered in it if you want to test shoot it. You can use a 6.5 Grendel bushing die with a 6mm neck bush to resize them. I also...

   Liked On: 04-06-2020, 10:57 AM

8. 
   Mathias liked post by Wingman On thread : 6x45 Rem barrel

   I just ordered a new custom 6x45 reamer today with zero free bore so it should shoot a wider range of bullets better with less jump.

   Liked On: 02-06-2020, 06:48 PM

9. 
   bing liked post by Wingman On thread : 6x45 Rem barrel

   I finally received what was supposed to be a pre-chambered 22" long fluted S/S 6mm TCU barrel but it wasnt. I had to make a chamber cast to actually work out what it was. Someone had used a .223...

   Liked On: 31-05-2020, 10:58 PM

10. 
    Barefoot liked post by Wingman On thread : 6x45 Rem barrel

    Should be here in a week to 10 days..

    Liked On: 31-05-2020, 05:03 PM

11. 
    Gkp liked post by Wingman On thread : What in the world?

    Its a belted magnum which headspaces on the belt not the shoulder. This means any amount of over sizing the shoulders stretches the brass forward and thins the rear cup intersection where the brass...

    Liked On: 31-05-2020, 04:31 PM

12. 
    Steelisreal liked post by Wingman On thread : 6x45 Rem barrel

    I just ordered a new custom 6x45 reamer today with zero free bore so it should shoot a wider range of bullets better with less jump.

    Liked On: 31-05-2020, 03:38 PM

13. 
    SlimySquirrel liked post by Wingman On thread : 6mm Creedmoor goats and deer

    Its "retained" velocity. While the .243 can match the muzzle velocity of the 6mm creedmoor when loaded equally, the off the shelf .243 win is limited to 95-100gr bullets because it is normally...

    Liked On: 31-05-2020, 01:38 PM

14. 
    GWH liked post by Wingman On thread : 6x45 Rem barrel

    More down time has me tinkering again.. I got thinking.. I run a 223 rem with a 69gr TMK at 3100fps, a .22 TCM with a 40gr Vmax at 3100 fps, a 6x45 with a 75gr Sierra HP at 3000fps, what might a 6mm...

    Liked On: 31-05-2020, 12:56 PM

15. 
    takbok liked post by Wingman On thread : 6x45 Rem barrel

    I just ordered a new custom 6x45 reamer today with zero free bore so it should shoot a wider range of bullets better with less jump.

    Liked On: 31-05-2020, 03:16 AM

Page 83 of 157 First ... 336970717273747576777879808182838485868788899091929394959697133 ... Last

• Jump to page: