I built one similar, however using a second motor and case feeder. I have a chart on the top left that I use to record previous settings for cartridge/headstamps. I use tempilaq to work out the...
Liked On: 07-06-2020, 11:47 AM
That does make a lot of sense wsm junkie and is also potentially an explanation for the type of off-side bruising we see with soft non exiting projectiles, the soft tissue / blood being forced ahead...
Liked On: 06-06-2020, 03:50 PM
141755bugger pup on order Korthals Griffon careful what you ask for
Liked On: 05-06-2020, 07:12 PM
Ive read 1900fps
Liked On: 05-06-2020, 01:27 PM
Well I guess it was only a matter of time, but I finally made the hard decision to let my old boy Rocky go last Thursday night. He was diagnosed with diabetes about a year ago at the age of 11 and...
Liked On: 02-06-2020, 07:32 PM
Took Bo my labrador down river with my rod and shot gun. 141335 Looking for ducks while having a fish. 141336 I hooked a trout with a 7gm toby lure and as it was fighting and doing areobatics a...
Liked On: 01-06-2020, 08:26 AM
Anneal every firing. Use deep wall socket,18v drill and Benzomatic. Does not have to be complicated. Forget about the rubbish of dropping the case in water after annealing.
Liked On: 31-05-2020, 09:03 PM
Took my girlfriend out for her first hunt in pureora yesterday, bit of rain here and there but overall not bad weather. Followed an old overgrown track for a couple ks which i had shot a pig on...
Liked On: 31-05-2020, 06:32 PM
You will be surprised how easy it was to make there is a parts list on YouTube for that as well. It only took a couple of hours to make and about $100 Sent from my CPH1903 using Tapatalk
Liked On: 31-05-2020, 06:10 PM
I used to wait for 3 or 4 firings before annealing but more recently I just anneal after every firing. Neck tension is more consistent and brass life way better. Have not seen any downside.
Liked On: 31-05-2020, 05:29 PM
There are a lot of interesting stuff regarding neck size vs full length size on Panhandle procession. Sent from my CPH1903 using Tapatalk
Liked On: 31-05-2020, 05:29 PM
And anneling on there as well, I made one off you tube and am going to use it after each firing and full length size with a 2 thou shoulder bump each...
Liked On: 31-05-2020, 05:29 PM
So one of the things I loved about the lock down was I had time to actually sit down and get a few ideas that had being floating around in my head for awhile started. As some of you may recall I...
Liked On: 29-05-2020, 08:30 AM
Small knife custom build, full story under gear a equipment , turned out cool.140258
Liked On: 29-05-2020, 08:22 AM
I miss read it I thought he was hunting for a new g/f. :P
Liked On: 27-05-2020, 07:00 PM