So finally got to chrono some loads-with 162 eldx-A Bolt rifle- 1/10 twist 22 inch barrel- 59.5g of rl26 gives me an ave of 2869 zero pressure . New Norma brass. Pretty happy.+/- 12fps spread. .2g under max from QL.
Groups and validation next.
R26 now September according to the importer.
Shot some more loads yest-
No velocity increase past 60g of RL26.Happy with these figures for 60g.
Lightly flat primers- hardly noticeable- no other pressure signs at all.
Nice work @ANTSMAN
Thanks for the update @ANTSMAN
I was told yesterday they continue to tinker with 26 and it’s putting some off as there are discrepancies between batches?
Nice velocities there, I’ve begun loading up using the last of my R19.
Anyone tried 17 or 2213 or 2217 as I have a heap of R17 still.
Sent from my iPhone using Tapatalk
Dan M
7x64 @162 R19 - I’ll load to magazine length while development then go from there.
Dan M
Ballistic twin to 280 so will be keen to see how you go @Danny
Did some load dev for 7x64 back a while now, 2213 was too fast (hit pressure before getting decent speeds), RL19 and 2217 better but knowing what I know now having done load dev for 280AI I’d be focusing on N560 or RL26. Have to get back to the 7x64 and have another play.
Bookmarks