Thread: 284 wizard

Just get a 270 @camo wsm

Originally Posted by 300_BLK

Just get a 270 @camo wsm

Wash your mouth out haha

@camo wsm neck it down to 27 Blaser Powderpuff or 6.8 Blaser Mag if you are metrically inclined

Originally Posted by Tony930

Rem700, 28" bartlein chambered in 7 blaser mag.
180eldm, 3150 fps 2225
195 eol, 3100 fps RL33
Round count approaching 1k, still shooting great, not chasing the lands yet.
Cool cartridge.
7 saum, 28" truflite
180eldm, 3000fps 2217
1/2 grain off my max, so probably in the 2900's with 26"
Awsome cartride!

How many grains 2225 are you using with 180 eld M ‘s please?

Pretty good, norma, readily available, some say its a little soft but haven't had any problems, up to 8 firings, had three slightly loose pockets (probably due to working up to pressure to find max)

69.6 2225, hit pressure at 71.2, was running 70 fps slower when first ran this load, don't know if was because it was lower temps (winter) or barrel was new, maybe a bit of both.
Usual stuff, each rifle different, work up.

Originally Posted by Tony930

69.6 2225, hit pressure at 71.2, was running 70 fps slower when first ran this load, don't know if was because it was lower temps (winter) or barrel was new, maybe a bit of both.
Usual stuff, each rifle different, work up.

I was going to suggest 69.5-70, but every ones rifle & scales are different

My data is very similar to Tonys and Kiwi Gregs... Had kiwi Greg sort a 7mm Blaser for me little while back and its very accurate as long as i do my part 28" Proof Research tube. Using Retumbo I started seeing signs of preasure at 71gr but best accuracy was at 70gr for my rifle at least. As with any load development be safe and work up from a lower powder charge. That data is for the 180 eld-m which I am getting great accuracy with. Havent cronied lately but ballistics program works with 3050fps set in it. Verified out to 870 yards, semi verified to 1180 yards, need to revisit that when there isnt 15+mph wind howling....