Just get a 270 @camo wsm
Just get a 270 @camo wsm
Warm Barrels!
@camo wsm neck it down to 27 Blaser Powderpuff or 6.8 Blaser Mag if you are metrically inclined
Warm Barrels!
Pretty good, norma, readily available, some say its a little soft but haven't had any problems, up to 8 firings, had three slightly loose pockets (probably due to working up to pressure to find max)
69.6 2225, hit pressure at 71.2, was running 70 fps slower when first ran this load, don't know if was because it was lower temps (winter) or barrel was new, maybe a bit of both.
Usual stuff, each rifle different, work up.
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
My data is very similar to Tonys and Kiwi Gregs... Had kiwi Greg sort a 7mm Blaser for me little while back and its very accurate as long as i do my part 28" Proof Research tube. Using Retumbo I started seeing signs of preasure at 71gr but best accuracy was at 70gr for my rifle at least. As with any load development be safe and work up from a lower powder charge. That data is for the 180 eld-m which I am getting great accuracy with. Havent cronied lately but ballistics program works with 3050fps set in it. Verified out to 870 yards, semi verified to 1180 yards, need to revisit that when there isnt 15+mph wind howling....
Last edited by Donald; 19-01-2018 at 11:23 PM.
Bookmarks