Thread: 300wsm heavies

Originally Posted by MSL

The one on the right is from a double shoulder shot at 150yds.
Both out of 14.5” .308 at 3023fps

Bloody hell. What powder are you using? I get ~2900 from a 16" using AR2206H or BM8208.

H335, lots of it


Sent from my iPhone using Tapatalk

Originally Posted by Tahr

This is a .30 cal 150TTSX @ 300 yds. 3150 fps. They work just fine up close.

In the vid it looks like I hit it a bit back but I was angling for where I wanted the bullet to go. It went right through it and was lodged in the off shoulder (see the pic).

https://www.youtube.com/watch?v=iovPBtIdvRA

Attachment 137022

wow thats cool !

thats primo !


QUOTE=MSL;989677]130ttsx at 400yd, spine shot above the shoulder. Didn’t hit much bone at all.
On the left. The one on the right is from a double shoulder shot at 150yds.
Both out of 14.5” .308 at 3023fps


Sent from my iPhone using Tapatalk[/QUOTE]

In all the years running my 300wsm best powders have been IMR4831 RL17 H4350 with bullets from 150gn right up to 230ATIP 185VLD i have shoot pigs out to 1065yds 200eld-x deer out to 1185yds but when it comes down to it with 300wsm you can cover the hole spectrum of hunting scenario,s from 50yds to 1200yds

Working up to 67.3 2213sc powder behind 208 eldm. 2800fts out of 24 inches tikka barrel.

Originally Posted by cameronjackwhite

Good to know, will be trying this powder. I have 178 eldms and 175tmks to try at present with superperformance and 2209.

@cameronjackwhite hey mate I've got a handfull of 195 TMK's and 190 Targex projies you can have to try.
PM your address if you want them.

Finally got my new Kimber back from having barrel shortened. So off to the range to sight it back in.
Hornady Precision Hunter 200gn Factory Loads ($104 a bloody box)
The load is hot in my gun but I like it a lot, first shot high and right. Made adjustment and fired 3 for group. I was worried shortening the barrel might have made things go Pooze but not so
And best of all every single fired case extracted with out any issues at all!!!


If you are looking for a heavy bullet in 300wsm its worth trying the Precision Hunter factory load for sure

Originally Posted by mikee

Finally got my new Kimber back from having barrel shortened. So off to the range to sight it back in.
Hornady Precision Hunter 200gn Factory Loads ($104 a bloody box)
The load is hot in my gun but I like it a lot, first shot high and right. Made adjustment and fired 3 for group. I was worried shortening the barrel might have made things go Pooze but not so
And best of all every single fired case extracted with out any issues at all!!!
Attachment 138086

If you are looking for a heavy bullet in 300wsm its worth trying the Precision Hunter factory load for sure

Cant really complain with that! Be interesting to know what its spitting them out at.

Originally Posted by cameronjackwhite

Cant really complain with that! Be interesting to know what its spitting them out at.

will try it Sunday with a Chrony Box gives velocity at 2820fps. Have some 175 TLRs to test too but not sure I will bother may just use factory 200gn load even if only 2600fps should be plenty of ommpf