Custom chambering, brass ,and complete rifle to put it in?
Sent from my GT-I9300 using Tapatalk 2
Custom chambering, brass ,and complete rifle to put it in?
Sent from my GT-I9300 using Tapatalk 2
Chamber and fit barrel, neck down brass.
What am i missing here?
Sent from my GT-S5360T using Tapatalk 2
"Hunting and fishing" fucking over licenced firearms owners since ages ago.
308Win One chambering to rule them all.
dies and etc
meh, I don't see the point 'cos from shooting loads from Gav's one over a chrony it literally is so inefficient that it does the same speeds as a .22-250 with 10gr more powder
Bet you never got the 22-250 to read 5000+ tho haha
Sent from my GT-I9300 using Tapatalk 2
Ah a neck down and its custom everything.
Everything i have read and seen first hand recons its the one.
If you can only get 22-250 speed out of a 22-243 logic says you ain't comparing apples with apples.
Obviously it will take a lot more powder for a small gain, that is the way of overbore clamberings.
But a gain none the less.
I don't shoot 500 rounds each weekend so a few grains of powder is neither here nor there especially as i already have the brass and dies.
Sent from my GT-S5360T using Tapatalk 2
"Hunting and fishing" fucking over licenced firearms owners since ages ago.
308Win One chambering to rule them all.
I like gavs complete lack of fucks he gives about killing barrels
Sent from my GT-I9300 using Tapatalk 2
They are just barrels
I really like my ex Gav 1-7 now 26", was 30", lost bugger all speed with the 4".
I wonder how much barrel it has left ?
It is still HELL accurate with the 90s, the only issue is at 1200 yards + it is bloody near impossible to hear it hit the steel or see a splash.
The 90s aren't very aggressive on the bunnies.
They really don't like it if you miss them, the impact will rip fist sized hunks of dirt out of the ground & shower them with crap, they would basically ignore the 40s out of the 204.
The 90s are great, the .551 Bc really shines way out there![]()
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Bookmarks