Saum
T3X stainless synthetic now coming in 6.5 creedmoor. Great rifle and a great caliber
my 260 sako shooting 147 eld-match with 09 doing 2725 smokes deer out to 800
Sent from my SM-G920I using Tapatalk
A recent & related thread on the other site.
FishnHunt - New Zealands Famous Hunting and Fishing Forum Since 1995 - 6.5 Creedmoor
Last edited by Puffin; 29-12-2017 at 09:19 PM.
x55
Creedmoor if you have a restricted mag length.
Plenty of off the shelf rifles, brass & ammo available now
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Any have overall length of a creedmoor with a 143eldx touching the lands ?
That depends on the individual throating of each gun, If you get a new barrel fitted the gunsmith can cut the throat to suit the projectile of choice
factory throats can be any thing depending on the wear of the reamer
Understood just wondering if its likely to be over 2.800
@Kudu, Well I had a Creedmoor with a 20" barrel & it was slower than my 6.5x47 (Hornady brass, 2209, 143eld) if you got some Lapua brass with the small primer pocket, Pushed it hard with a fast powder like Re17, etc then you'd probably get it to 2800, whether it would be accurate there, who knows? also hornady list there factory 143eld-X load as doing 2700fps from a 24" test barrel.
Shut up, get out & start pushing!
@Kudu, Well I had a Creedmoor with a 20" barrel & it was slower than my 6.5x47 (Hornady brass, 2209, 143eld) if you got some Lapua brass with the small primer pocket, Pushed it hard with a fast powder like Re17, etc then you'd probably get it to 2800, whether it would be accurate there, who knows? also hornady list there factory 143eld-X load as doing 2700fps from a 24" test barrel.
Shut up, get out & start pushing!
Bookmarks