Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct Terminator


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 16
Like Tree3Likes

Thread: 7mm Rem Mag- Load- Starting Point

  1. #1
    Member Richie's Avatar
    Join Date
    May 2013
    Location
    North Canterbury
    Posts
    131

    7mm Rem Mag- Load- Starting Point

    Hi guys- long time....

    Anyone got any load data for 7mm Rem Mag w/ 168 Berger VLD's?
    Ultimately wanting to achieve approx 2900-3000fps at the muzzle but not sure where to start with powder types or weight.

    Any starting point info would be greatly appreciated.

    Cheers!

  2. #2
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,058
    This is going from memory. Federal large rifle magnum primer, ADI 2217 71.5gr. Gave 3060fps from a 26” barrel.
    Projectile was jammed 15 thou into the lands.

  3. #3
    Banned
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,992
    go try the nosler 140gr partitions instead.
    i can give you a few to try if you want (loaded rounds not projectiles)

  4. #4
    Member Richie's Avatar
    Join Date
    May 2013
    Location
    North Canterbury
    Posts
    131
    Cheers Stug.
    Barrel is 24" custom carbon with stealth over-barrel suppressor.
    Maybe worth starting at 68gr and working up?
    stug likes this.

  5. #5
    Member Richie's Avatar
    Join Date
    May 2013
    Location
    North Canterbury
    Posts
    131
    I'm trying to replicate (roughly) the Federal hybrid hunter factory ammo, as it seems to shoot well in my rifle, but can't get any in the country at the moment!
    What sort of range are you getting out of the noslers @gonetropo?

  6. #6
    Banned
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,992
    Quote Originally Posted by Richie View Post
    I'm trying to replicate (roughly) the Federal hybrid hunter factory ammo, as it seems to shoot well in my rifle, but can't get any in the country at the moment!
    What sort of range are you getting out of the noslers @gonetropo?
    well my best shot was a hare at 983m ( though it did take several rounds to get the bugga)
    i no longer have reloading gear so as i get thru the rounds you are welcome to the empties

  7. #7
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,771
    Start at 69 - 70 gn and work up carefully

  8. #8
    Member Richie's Avatar
    Join Date
    May 2013
    Location
    North Canterbury
    Posts
    131
    Cheers for the help everyone!

  9. #9
    #KnowsFuckAll Dorkus's Avatar
    Join Date
    Jul 2015
    Location
    Mangawhai
    Posts
    1,310
    I use 168vld over 73.5g 2225 in my rem mag

    Gives me 3050 out of a 21.5" pipe
    "I heard Jesus did cocaine on a night out. Eyes wide-open, dialated, but he's fine now. And if his father ever finds out, then he'd probably knock his lights out...
    Gets a little messy in heaven "
    - Venbee

  10. #10
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    Quote Originally Posted by Richie View Post
    I'm trying to replicate (roughly) the Federal hybrid hunter factory ammo, as it seems to shoot well in my rifle, but can't get any in the country at the moment!
    What sort of range are you getting out of the noslers @gonetropo?
    right so you keep ONE factory round aside...set up your dies for length/seating depth with it...giving you same or VERY similar bullet jump you are half way there.... velocity will be somewhere between 3/4 and maximum...being a factory loading it wont be super hot and being federal shouldnt be too mild.... you could if you happend to know what powder was used in factory load pull a round and measure it.... or if had chronicgraph fire factory load and keep going with reload till find same velocity...... or just put a not too hot load together and go shoot something.
    75/15/10 black powder matters

  11. #11
    Member Richie's Avatar
    Join Date
    May 2013
    Location
    North Canterbury
    Posts
    131
    Quote Originally Posted by Micky Duck View Post
    right so you keep ONE factory round aside...set up your dies for length/seating depth with it...giving you same or VERY similar bullet jump you are half way there.... velocity will be somewhere between 3/4 and maximum...being a factory loading it wont be super hot and being federal shouldnt be too mild.... you could if you happend to know what powder was used in factory load pull a round and measure it.... or if had chronicgraph fire factory load and keep going with reload till find same velocity...... or just put a not too hot load together and go shoot something.
    Federal will be mixing powders to get a 'secret recipe' I would imagine-
    Yea going to just work up load to same (or very similar but maybe slightly higher) velocity as you say.
    Micky Duck and techno retard like this.

  12. #12
    Member Richie's Avatar
    Join Date
    May 2013
    Location
    North Canterbury
    Posts
    131
    Quote Originally Posted by gonetropo View Post
    go try the nosler 140gr partitions instead.
    i can give you a few to try if you want (loaded rounds not projectiles)
    Hi @gonetropo, what recipe are you using with the 140gn nosler partitions, and what MV are you achieving?
    Seem to only be able to find 150gn noslers?
    Seems the berger 168gr VLD's I am after are about $350 per 100.. makes it a pretty pricy option!

  13. #13
    Banned
    Join Date
    Jun 2015
    Location
    christchurch
    Posts
    17,992
    Quote Originally Posted by Richie View Post
    Hi @gonetropo, what recipe are you using with the 140gn nosler partitions, and what MV are you achieving?
    Seem to only be able to find 150gn noslers?
    Seems the berger 168gr VLD's I am after are about $350 per 100.. makes it a pretty pricy option!
    AR2213SC 63,5grains for 3150 foot per second at the muzzle

  14. #14
    Member
    Join Date
    Apr 2019
    Location
    Wanganui
    Posts
    3,254
    Quote Originally Posted by Richie View Post
    Hi @gonetropo, what recipe are you using with the 140gn nosler partitions, and what MV are you achieving?
    Seem to only be able to find 150gn noslers?
    Seems the berger 168gr VLD's I am after are about $350 per 100.. makes it a pretty pricy option!

    That’s far to dare $220 max

  15. #15
    Member Richie's Avatar
    Join Date
    May 2013
    Location
    North Canterbury
    Posts
    131
    Quote Originally Posted by Kelton View Post
    That’s far to dare $220 max
    Yea, think I cooked the number there... picked up 100 for $180 today with another 100 on hold, so back to plan A it is!

 

 

Similar Threads

  1. Starting point for 7mm 175eldx in rem mag
    By falcon6555 in forum Reloading and Ballistics
    Replies: 7
    Last Post: 27-12-2021, 07:03 AM
  2. Starting point for Hornady 68g BTHP
    By charliehorse in forum Reloading and Ballistics
    Replies: 2
    Last Post: 24-06-2020, 07:55 PM
  3. .243 powder & projectiles starting point ?
    By bing in forum Reloading and Ballistics
    Replies: 21
    Last Post: 31-05-2019, 09:58 PM
  4. Starting point for ballistics programs
    By Norway in forum Shooting
    Replies: 2
    Last Post: 12-01-2015, 07:03 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!