Thread: Ballistic app

Cool thanks for the help guy's

Sent from my SM-G900I using Tapatalk

I can understand how shooting position can alter POI and flex in less rigid stock designs with loading the bipod differently ect. But assuming you altered shooting position each range and only had results that didn't match at the last range seems like something else? The more experienced guys know best though I'd trust in their assumptions.. More shooting and verifying would have to be the best way to go though...

[QUOTE=deepsouthaussie;469073]I can understand how shooting position can alter POI and flex in less rigid stock designs with loading the bipod differently ect. But assuming you altered shooting position each range and only had results that didn't match at the last range seems like something else? The more experienced guys know best though I'd trust in their assumptions.. More shooting and verifying would have to be the best way to go though...[/QUOTE]

yip, until then we are all pissing in the wind

Definitely agree with above, more verification is needed.

A shift in elevation due to position can be so subtle it's not funny.
Assuming bipod is loaded consistently (I personally do not load my bipod at all) the anomaly will start further back along the rifle due to hold and position on shoulder.
Also cheek weld can have an influence.

Try shifting everything and resetting up at 100 m between groups.
Unless you have a sound, consistent technique, you will get a change in MPI from POA😆


Sent from my SM-G900F using Tapatalk

Yea I think I need to Re shoot at the longer range to check things I'll keep you guys informed.

Sent from my SM-G900I using Tapatalk

I use Strelok+ seems to work on only used to 400m so far though and it only allows BC1 profiles.

Yea that's what I used as well and was fine out to 400 but 580 didn't seem to work as well but I will need to check it again.

You could be a mil click off. I reckon your bottom shot was a harder than usual hold but your shot slightly higher is about 1 click off if you're using a mil scope.

Some scopes need to be true'd using the turret adjustment on the app. My march needed this because some genius used the American artillery version of the mil system when designing it. I had to tweak it to 1.0182 to get it tracking correctly (both elev and windage)

Hey man make sure your using the g7 drag model.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Any one know how to change Strelok from to G7

Sent from my SM-G900I using Tapatalk

Originally Posted by 25/08IMP

Any one know how to change Strelok from to G7

Sent from my SM-G900I using Tapatalk

only the most expensive one c an use g7

Shooter uses both G1 & G7 FWIW

Can anyone if I give them the vol and BC of my load run it through their app so I can compare it with mine

Sent from my SM-G900I using Tapatalk

here is a good article on which one you should be using Ballistics 101: What Is Ballistic Coefficient? - The Firearm Blog

Cool thanks I'll have a look

Sent from my SM-G900I using Tapatalk