General consensus is 2209 for 90gr softpoints? 2208 work ok?
General consensus is 2209 for 90gr softpoints? 2208 work ok?
Loaded up some 90gr Hot-Cor FBSP rounds (heaviest projectile that I know a 1:10 will spin fine) Should be decent weather this saturday so will give her a go then.
The best load ever after using a 243 on the odd occasion is:
243
85 grn Interbond
2.715 oal in my rifle (10 thou off lands)
43 grns Hybrid V 100 (don't try this at home. Start lower)
3270fps
20" xbolt.
Tiny target holes. Large animal holes.
Best load for a 243?
Get a 243 improved. Commonly known as a 308.
Experience. What you get just after you needed it.
"Hunting and fishing" fucking over licenced firearms owners since ages ago.
308Win One chambering to rule them all.
I got one of these howa .243s (a friend owns it...honest!). I was happy to learn I can use my stocks of 4831sc but bummed out at how short the howa chamber throat is. I mean it's bugger all out much further than (using the canulure line to the case mouth. Now where's the fun in that??
Forbes .243
90Gr Speer hotcore
2209 43.5gn
15 thou jump
Lapua brass
CCI primer
3025fps out of 21"
Literally a single hole, approx 5 mm 3 shot group
Thanks @Barefoot, just loading up some 87gr BTHP's, will go 43.5gr 2209.
Going to see how these go, if not happy with the performance I'll switch to the 85gr Sierra
I am literally doing the same thing! Couldn't find the Sierras when I was buying. Enjoy the Targex but just keen to try something else.
@SlimySquirrel seems to work mate. Just got back from the range. 2 in the same hole 1 off to the left, overall group 0.5"
Ok, sounds like mine is a bit slow, will have a tweek
Holy shit.... Read that as "Twerk"... Wasn't sure how that was gonna help.
Bookmarks