Thread: Brass damage ?? Help

Originally Posted by Gibo

Pepper you need to chill a bit. These guys are not attacking you. The reason these guys are saying you got conned is because not one rifle made gets etching on the bolt unless some gas gets past the primer. That is what the hornady ammo did.
Can you pm me who checked it

Lol yea I probably do . But the etching is only after being used . If it's hard to believe yous all need to see it for yourselves. There's no point trying to convince me when I've seen it for myself in 2 different shops .


Sent from my iPhone using Tapatalk

It didn't strike you as odd that only x bolts apparently get gas cut bolts?

Sent from my SM-G800Y using Tapatalk

Originally Posted by veitnamcam

It didn't strike you as odd that only x bolts apparently get gas cut bolts?

Sent from my SM-G800Y using Tapatalk

Another good reason not to buy a browning!

Originally Posted by veitnamcam

It didn't strike you as odd that only x bolts apparently get gas cut bolts?

Sent from my SM-G800Y using Tapatalk

Bro !! You are a fuckhead


Sent from my iPhone using Tapatalk

Originally Posted by pepper123

Bro !! You are a fuckhead


Sent from my iPhone using Tapatalk

Wrong!! You are a fuckhead. Piss off mate and grow up a bit.

You're basically shitting on the most helpful and generous guy on here.

I think I see what they are telling you, and they are probably correct, that the headspace is fine and that the etching is not deep enough to cause any issues with function.

however, your brand new rifle has been damaged by some ammo they sold you, albeit cosmetic, I would still want it rectified.

Put it this way, you buy a brand new car and the dealership sell you a car care kit to clean it, the soap eats your paint and it starts peeling, you take it back and they check it over and tell you "nothing wrong with it mechanically, still safe to drive." They then show you 2 others with the same issue to prove this is normal. A mechanic also tells you it's fine to drive.
Would you be happy?

The thing is they do have something to gain, the gunshop will probably have another damaged x-bolt they will now have to try and sell, along with the ones they showed you. Perhaps points to a bad batch of ammo that they have been selling?

As for the gunsmith, I suspect he was more referring to the fact that the headspace is ok and the damage to the bolt is cosmetic.
I am pretty confident he will not deny that there is damage.


Sent from my iPhone using Tapatalk

Mate, no offense but the shop has got away with giving you a $40-50 box of ammo as opposed to forking out $800-900 to replace your bolt which you are well within your rights to demand. That is why people are saying you got conned.

Originally Posted by pepper123

There's no point trying to convince me


Sent from my iPhone using Tapatalk

Then I suggest you go buy as much superformance ammo as you can and go shoot as much as you can.

Also a gunsmith told me that second hand x bolts like their ammo warm so best you put it on the dash with the heater on on the way to the range.

Sent from my SM-G800Y using Tapatalk

Is this a James Sully thread?

Originally Posted by veitnamcam

Then I suggest you go buy as much superformance ammo as you can and go shoot as much as you can.

Also a gunsmith told me that second hand x bolts like their ammo warm so best you put it on the dash with the heater on on the way to the range.

Sent from my SM-G800Y using Tapatalk

Lol your such a fuckhead . The superformance is mint now . It was a shitty batch , . If anything hornady would be forking out so why would a shop care it's not there fault .


Sent from my iPhone using Tapatalk

Originally Posted by pepper123

Lol your such a fuckhead . The superformance is mint now . It was a shitty batch , . If anything hornady would be forking out so why would a shop care it's not there fault .


Sent from my iPhone using Tapatalk

Which is exactly what everyone has been telling you!
It will be a hassle for the gunshop, as the rifle is still safe they are happy to palm you off and not have to deal with it.

There are none so blind.....


Sent from my iPhone using Tapatalk

Originally Posted by pepper123

Lol your such a fuckhead . The superformance is mint now . It was a shitty batch , . If anything hornady would be forking out so why would a shop care it's not there fault .


Sent from my iPhone using Tapatalk

I prefer to be called a cunt but whatever you like buddy.
Are you 16?

Sent from my SM-G800Y using Tapatalk

Originally Posted by Spudattack

Which is exactly what everyone has been telling you!
It will be a hassle for the gunshop, as the rifle is still safe they are happy to palm you off and not have to deal with it.

There are none so blind.....


Sent from my iPhone using Tapatalk

It doesn't need replacing clown it's a bit of dust etched into some steel it's so petty to ask to get that replaced its pathetic


Sent from my iPhone using Tapatalk

[QUOTE=veitnamcam;600012]I prefer to be called a cunt but whatever you like buddy.
Are you 16?

Sent from my SM-G800Y using
Fuck off idiot


Sent from my iPhone using Tapatalk

With this attitude im glad your bolt has devalued your rifle and you got tucked, good job