Thread: FL resized rounds wont chamber

Just from my small experience loading I have found that the best results are when the die and shell holder match ie same brand, have noticed the headspace on some are different and don't match each other just something small to look at if you haven't already

Just want to say thanks for posts.
Had the exact described issue. After reading posts I did three things. Just a little more lube particularly in the neck, Lowered the die so it was more (tighter) overcamed, paused for a few seconds before releasing the rcbs lever.
All the problems are now gone.
It was driving me MAD.
Thanks

https://forum.accurateshooter.com/th...-over.4104321/

Originally Posted by glens

Just want to say thanks for posts.
Had the exact described issue. After reading posts I did three things. Just a little more lube particularly in the neck, Lowered the die so it was more (tighter) overcamed, paused for a few seconds before releasing the rcbs lever.
All the problems are now gone.
It was driving me MAD.
Thanks

Me too luckily a local to me forum member helped point me in the right direction and also annealed my brass for me to make it easier.