Thread: Frankford Arsenal M press coaxial review

Originally Posted by zimmer

If you haven't got a concentricity gauge just use the method I used for years - roll the loaded round across the top of your desk. You'll see by eye if you have bad concentricity.

Yeah have done that and it looks good to the eye, I have access to a concetricity gauge but unless I have accuracy issues or obvious run out, I can't see myself getting to worried about it.

@dannyb Are you still happy with this? Noticed any issues?

Originally Posted by Speill

@dannyb Are you still happy with this? Noticed any issues?

Still have it, considering an upgrade though, 300prc running 225gn eldm's seated out long only just fit. Otherwise all good and no issues.
There are better presses out there but he far this isn't the worst.

I'm really happy with mine. The only issue I have is with the die blocks and grub screw coming loose. I'm going to try to machine, drill and tap one to make it a clamp. If that fails I'll buy some hornady rings.

Originally Posted by Bobba

I'm really happy with mine. The only issue I have is with the die blocks and grub screw coming loose. I'm going to try to machine, drill and tap one to make it a clamp. If that fails I'll buy some hornady rings.

I have used loctite on mine (the grub screws) seems to be working so far, otherwise you can just use 2 normal style die rings.

Be interesting to compare using one of these with using the RCBS Summit.