Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Night Vision NZ


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 23 of 23
Like Tree23Likes

Thread: Hodgdon 69 gr 223 manual error?

  1. #16
    Member
    Join Date
    Dec 2019
    Location
    Dunedin
    Posts
    374
    I have 25.2gr of 2206h behind a 69gr targex in mine. I went up to 25.5gr and had no pressure signs but the 25.2gr group was slightly better and I just wanted to play it safe. Is still leaving a 16inch barrel at 2800fps
    Nathan F, Dama dama and Micky Duck like this.

  2. #17
    Member
    Join Date
    May 2023
    Location
    Lake Hawea
    Posts
    41
    Quote Originally Posted by grandpamac View Post
    Greetings again @NathanSBR.
    I had a closer look at the data and the pressure for each of the loads is close to 50,000 CUP (copper units of pressure) which is below max for the .223. The CUP measures have been out of date for 30 odd years now so it is old data. Some of the .223 data is held a bit below max presumably to give consistent port pressure in semi auto rifles. The 60 grain V-MAX gives a little more pressure than the SMK likely due to the longer bearing surface and deeper seating. From my loading and chronographing it appears that the lower charges in some data is due to the heavy compression needed to get the powder in. In an earlier post I wrote about data variations with the 60 grain V-MAX and BM8208 and there are some test loads in the blocks ready for chronographing so will report in due course.
    A couple of years back I did some comparative testing with BM8208, AR2206 and AR2206H with the 125 grain projectile in the .308. In that application BM8208 and AR2206 were close to the same speed with AR2206H a bit slower. This makes me think that BM8208 might be a better powder for the .223 than AR2206H.
    Regards Grandpamac.
    Thanks for the input

  3. #18
    Member
    Join Date
    May 2023
    Location
    Lake Hawea
    Posts
    41
    Quote Originally Posted by Southerner223 View Post
    I have 25.2gr of 2206h behind a 69gr targex in mine. I went up to 25.5gr and had no pressure signs but the 25.2gr group was slightly better and I just wanted to play it safe. Is still leaving a 16inch barrel at 2800fps
    Yeah nice. I have just recently ordered some Targex to try, as TMKs are like hen's teeth... Story of my life every time I find a good load....

  4. #19
    Member
    Join Date
    Aug 2022
    Location
    New Plymouth
    Posts
    1,599
    Quote Originally Posted by NathanSBR View Post
    Yeah nice. I have just recently ordered some Targex to try, as TMKs are like hen's teeth... Story of my life every time I find a good load....
    My 18" Tikka the 80grn Targex shoot even better.

    Sent from my CPH2145 using Tapatalk

  5. #20
    Member
    Join Date
    May 2023
    Location
    Lake Hawea
    Posts
    41
    My mate sent me this picture recently

  6. #21
    Member
    Join Date
    Aug 2022
    Location
    New Plymouth
    Posts
    1,599
    Quote Originally Posted by NathanSBR View Post
    My mate sent me this picture recently
    Superdiver

    Sent from my CPH2145 using Tapatalk
    superdiver likes this.

  7. #22
    Member
    Join Date
    May 2023
    Location
    Lake Hawea
    Posts
    41
    Quote Originally Posted by 25/08 IMP View Post
    Superdiver

    Sent from my CPH2145 using Tapatalk
    I think you know one of my other best mates also haha
    25/08 IMP likes this.

  8. #23
    Member
    Join Date
    May 2023
    Location
    Lake Hawea
    Posts
    41
    Think I'll try 25.2, 25.5 (which most people seem to be having success with) and 25.8 (what the rifle currently likes with the Sierra's) of 2206HakaH4895 behind the 69gr Targex this weekend and see how they go...
    superdiver and 25/08 IMP like this.

 

 

Similar Threads

  1. Error 43?
    By homebrew.357 in forum Questions, Comments, Suggestions, Testing.
    Replies: 8
    Last Post: 28-10-2017, 01:53 PM
  2. Rooky error # 5
    By Pengy in forum Reloading and Ballistics
    Replies: 22
    Last Post: 14-09-2017, 09:10 PM
  3. Trial and error
    By SlimySquirrel in forum Reloading and Ballistics
    Replies: 42
    Last Post: 19-02-2017, 02:09 PM
  4. Picture error
    By Wirehunt in forum Questions, Comments, Suggestions, Testing.
    Replies: 3
    Last Post: 05-03-2013, 02:29 PM
  5. 404 Error
    By kiwijames in forum Questions, Comments, Suggestions, Testing.
    Replies: 7
    Last Post: 19-06-2012, 03:41 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!