Thread: How much 'Zombie' ammo to you have?

Don't get many zombies in these parts,
But I have about 700 22 LR CCI, Win and Fed bulk,
400 9mm
250 .38 Spec
50 with wadcutters
150 .357 Mag
and enough to load another 800 9's

Originally Posted by Brennos

So speaking of bulk ammo. Any tips on the best of the cheap .223 ammo? I boguht a semi yesterday and can see me using a lot of ammo. Steel case is fine, prefer soft point, but if FMJ is more accurate I will buy both. Hornady do a cheap one, and barnaul is the cheapest I have found so far. I'd like to reload, but the gun dents cases on ejection, so I now need to get my file out and modify it a little. I'm not sure if I can be bothered, considering how cheap some of the 223 ammo is...

Not sure about rifle ammo, only use .22 LR, but heres where i shop
All the 22 Calibers

G'Day Fella's,

Just finished Full Length Sizing (FLS) 900 odd Winchester .223Rem cases!
I swapped 1000 once fired Win .308 cases for 1000, supposedly once fired .223 and 600 odd used .40 S&W pods.

Anyway, after sorting and culling the shitty .223 pods, I ended up with about 900 good ones.
Next, I'll be getting the case trimmer into action.
All of a sudden the Dillon electric case trimmer, sounds like a great idea!
It will keep off the streets and out of the Pub for a while!!!

Hope you all had a Great Christmas Day!!!

Doh!
Homer

Hornady Training gets my vote as the best cheap ammo

Need to get my ammo factory into production and make some $$ then

Originally Posted by Spanners

Need to get my ammo factory into production and make some $$ then

Price me 1-200 .223 rounds 50-55gr not too hot

Been watchin the telly Spanners? Day of the dead was on the other night,Dawn of the dead last night.Thought of you when the gun store owner was popping heads from the roof!

Originally Posted by veitnamcam

Been watchin the telly Spanners? Day of the dead was on the other night,Dawn of the dead last night.Thought of you when the gun store owner was popping heads from the roof!

I havnt - been making big pile of jetski parts into a complete one.

Must get onto them.

Did some more of this today


Prob got enough that I can put the dustcover over it for now haha

I wish I had time to shoot enough to warrent one of them! Good luck with the ski Iv had 3 and they are PITA to work on!

If I had an AR15 I'd want something like this for when the Zombies come. Maybe even two of them.

Knock it out in an afternoon no probs

Hell, I only have around:
100x .223
10x .270
25x .308
300x 12g (mix of #0 buck and #3 [mostly] and #4)
1000x .22LR

Have sh*t loads of brass and projectiles, but haven't been bothered to load them over the holidays.

Originally Posted by Spanners

Knock it out in an afternoon no probs

I bet you could with the mini factory you have. What do you reckon the rounds per minute/hour would be with your Dillon set up?

Originally Posted by Normie

I bet you could with the mini factory you have. What do you reckon the rounds per minute/hour would be with your Dillon set up?

Does 20 per min or 1200 hr
I can get close to that by hand when loading 9mm if my arm can keep up

That's awesome.