Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Results 1 to 4 of 4
Like Tree1Likes
  • 1 Post By mikee

Thread: Maker 308 subs

  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Kapiti Coast
    Posts
    41

    Maker 308 subs

    Just got myself some Maker 200gr sub 30cal projectiles for my Bergara Ba13 308. 1:8 twist . Most of my hunting is tight bush stuff over a indicating dog. So 10 to 60 mt shots are it.
    Does anyone have a recipe for a sub load for this setup . thanks MM

  2. #2
    Member
    Join Date
    Oct 2014
    Location
    Taupo
    Posts
    489
    I'm using 12.8g Trail boss in my sako 90 with a 1:7 twist. They doing about 1000 fps.

  3. #3
    Gone................. mikee's Avatar
    Join Date
    Aug 2012
    Location
    Nelson, New Zealand
    Posts
    9,841
    12gn Trail Boss average 1066fps over 5 shots (LabRadar)
    12.5gn Trail Boss average 1201fps over 5 shots (LabRadar) Not Subsonic
    Tikka 308W 16 inch 1-8 twist barrel.
    Used heavy crimp
    Had to come up 10 MOA from 100yard zero from "normal" 100m Zero
    12gns accuracy was 1.5 inch group approx
    12.5 accuracy was approx 2.5 inch group approx
    Certainly both groups would be good enough for deers shooting at 100m or less.
    Very quiet, like Subsonic, suppressed .22 almost.
    Micky Duck likes this.
    Trust the dog.........................................ALWAYS Trust the dog!!

  4. #4
    Member
    Join Date
    Oct 2014
    Location
    Taupo
    Posts
    489
    I went to the range this morning to try out some 150 BT's loads and I put 3 subs through at the end at 100 yards (200gr makers) Its appears my barrel has sped up a bit now that its had about 70 rounds through it.
    They now doing around the 1115- 1130 mark so will try a new load at 12.3g Trail boss and see how that goes.

 

 

Similar Threads

  1. Maker Rex Bullets
    By Scout in forum Reloading and Ballistics
    Replies: 1
    Last Post: 02-08-2020, 03:48 PM
  2. anyone on here own a cas check maker for 44 cal
    By rambo-6mmrem in forum Reloading and Ballistics
    Replies: 2
    Last Post: 16-01-2015, 08:20 PM
  3. New barrel Maker
    By ChrisF in forum Firearms, Optics and Accessories
    Replies: 12
    Last Post: 08-01-2015, 08:45 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!