If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
With the info supplied QL gives 2760ft/sec for 58.6gr of N560 @ 60k peak PSI, 2638 for 56.1gr of N160 for the same peak pressure. Both are compressed loads, 104% & 107% respectively. The COAL seems very long however, not much neck engagement. Re22 is very similar to N560 as expected. N550 will fit the case better, 52.5gr is 93.5% fill for 60k peak PSI again but velocity is down on the above slower double-based powders; 2690ft/sec. Shortish barrel, can't be helped it seems.
This is straight off QL and the usual disclaimers apply for unverified loads with 60k PSI peak selected as an arbitrary reference point, suitability for the application unknown, etc...
Cheers, T.
Tested today, the pressure/velocity was achieved at 57gr rather than the estimated 58.6. Quite big jumps in velocity for every half grain too, an interesting powder in this caliber. 2715 fps was a good accuracy node
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks