Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Terminator


User Tag List

+ Reply to Thread
Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 46
Like Tree67Likes

Thread: overlap between cartridges

  1. #31
    Member
    Join Date
    Mar 2012
    Location
    Waikato
    Posts
    2,109
    I was thinking of the 16” bbl 308 with de-moduled suppressor which is lighter shorter well balanced and has similar recoil to the traditional full length 243. Not as flat shooting if course but hits harder with a bigger kill zone. So theres not as much need for a light calibre, I should have said.
    MB likes this.

  2. #32
    Member
    Join Date
    Mar 2022
    Location
    Catlins
    Posts
    502
    So, if we had a cutoff time of, say 100 years give or take a year or two either way, where does that leave us caliber wise with regard to which common ones you can buy factory ammo for, are pretty much as they were regarding twist rate etc and would still be perfectly acceptable to most of us for our general use??

    7 x 57
    30-06
    270 (I know it’s out by a couple of years but just because!!)

    What else??
    Micky Duck likes this.
    “Age is a very high price to pay for maturity”

  3. #33
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    25,069
    you would have to include 303brit and 6.5x55 in that list and 45/70 and 30/30
    Bagheera and Sidetrack like this.
    75/15/10 black powder matters

  4. #34
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,103
    Quote Originally Posted by Sidetrack View Post
    So, if we had a cutoff time of, say 100 years give or take a year or two either way, where does that leave us caliber wise with regard to which common ones you can buy factory ammo for, are pretty much as they were regarding twist rate etc and would still be perfectly acceptable to most of us for our general use??

    7 x 57
    30-06
    270 (I know it’s out by a couple of years but just because!!)

    What else??
    You missed the father of all three, the 8 x 57. You can still buy rifles and decent ammo for it in Europe. Add the 7 x 64 as it is hard to buy 7 x 57 new rifles these days. The list goes on for quite some time.
    GPM.
    Bagheera and csmiffy like this.

  5. #35
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    25,069
    you could have bought some dominion branded stuff off this forum just last week!!!!!
    75/15/10 black powder matters

  6. #36
    MB
    MB is online now
    Member MB's Avatar
    Join Date
    Jan 2016
    Location
    Deerless North
    Posts
    4,754
    Quote Originally Posted by Bagheera View Post
    I was thinking of the 16” bbl 308 with de-moduled suppressor which is lighter shorter well balanced and has similar recoil to the traditional full length 243. Not as flat shooting if course but hits harder with a bigger kill zone. So theres not as much need for a light calibre, I should have said.
    Slightly relevant to your point, all other things being equal, it seems that .308 "Lite" rounds will produce less recoil than a .243. Makes the .308 more versatile and the .243 less attractive to my mind.

  7. #37
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    25,069
    but yo ucan just as easily make the EBRG a pussy to shoot with a 80-87 grn projectile and still not be hamstrung on anything less than a fired up red stag front on....the suppressor makes it almost moot point,either will be soft shooting and the 7mm08 is the split the difference round.
    75/15/10 black powder matters

  8. #38
    Member
    Join Date
    Mar 2012
    Location
    Waikato
    Posts
    2,109
    I dont think the 3006 overlaps with anything.
    It IS anything you want.
    30.06king likes this.

  9. #39
    Member
    Join Date
    Jan 2018
    Location
    kaiapoi
    Posts
    7,168
    Yes and no concerning the 3006.
    Great cartridge.
    But powders and bullets have shifted things up
    In the old days the performance was lower. A 300 HH was better than a 3006 but nowadays the 3006 is nudging what the HH did. By the same token with modern loads the 300hh has climbed a little.
    Using that logic a modern 308 is doing what the 3006 used to do.
    Also agreeing with grandpamac, the 8x57 which was a rip snorter at several stages of its development during WW2 and arguably the equal if not a little better than the 06 on the battlefield has gone backwards if using American ammo. Stick to using euro stuff and load to its potential in good firearms and it's a cracker

  10. #40
    Member -BW-'s Avatar
    Join Date
    Jun 2019
    Location
    Shannon
    Posts
    1,142
    Quote Originally Posted by Sidetrack View Post
    So, if we had a cutoff time of, say 100 years give or take a year or two either way, where does that leave us caliber wise with regard to which common ones you can buy factory ammo for, are pretty much as they were regarding twist rate etc and would still be perfectly acceptable to most of us for our general use??

    7 x 57
    30-06
    270 (I know it’s out by a couple of years but just because!!)

    What else??
    Don't forget the great forefather 8x57

  11. #41
    Member
    Join Date
    Mar 2022
    Location
    Catlins
    Posts
    502
    Have been catching up on some reading on the 222rem. In a nutshell, it was created because there was a rather large void between the 22Hornet and the 220Swift and very shortly after we have a magnum version and then on and on from there. Getting back to MD’s original question, the facts are that “Nature abhors a vacuum” and we as a species cannot stop tinkering with shit. It maybe a spiral of ever diminishing returns but its in our genes and we’ll probably never be satisfied with the one thing.

    I’m good with that.
    308 and Micky Duck like this.
    “Age is a very high price to pay for maturity”

  12. #42
    Member
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,670
    The 7x57 came before the 8x57.
    The Americans and Brits were used to test the 7x57 performance in Cuba and the SA velds pre 1900.


    Sent from my iPhone using Tapatalk
    Barnes130 likes this.

  13. #43
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,103
    Quote Originally Posted by Dicko View Post
    The 7x57 came before the 8x57.
    The Americans and Brits were used to test the 7x57 performance in Cuba and the SA velds pre 1900.


    Sent from my iPhone using Tapatalk
    Greetings,
    The 8x57 was introduced in 1888 and was not a Mauser cartridge originally. The 7x57 was introduced in 1892 following the 7.65 x 53 in 1889.
    Regards Grandpamac.
    Micky Duck and Longrun like this.

  14. #44
    Member
    Join Date
    May 2012
    Location
    Sydney
    Posts
    1,670
    I stand corrected!


    Sent from my iPhone using Tapatalk
    grandpamac likes this.

  15. #45
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,103
    Greetings @Dicko and all,
    The development of smokeless powder military rifle cartridges was extremely rapid. The French started it al with their Lebel rifle and its 8mm smokeless cartridge in 1886. Neither the rifle nor the cartridge case was all that special but the smokeless powder and the calibre was revolutionary. A deserter from the French army delivered a rifle and its cartridges to the Germans who had introduced their first repeating rifle in 1884 which was now obsolete. A rapid development of a new army rifle for Germany, at Spandau, resulted in the M88 "Commission Rifle" and the 8mm cartridge. The action had elements of both Mauser and Mannlicher designs. In 1889 Mauser produced their first smokeless cartridge and rifle chambered for the 7.65 x 53 Mauser cartridge in Belgium. Things moved on rapidly from there.
    Regards Grandpamac.

 

 

Similar Threads

  1. old shot gun cartridges
    By splendid67 in forum Firearm Safety
    Replies: 6
    Last Post: 21-08-2018, 07:06 PM
  2. Inaccurate Cartridges
    By Marty Henry in forum Reloading and Ballistics
    Replies: 90
    Last Post: 21-10-2017, 06:40 PM
  3. AR15 with big cartridges
    By Kiwi Greg in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 02-07-2017, 10:42 PM
  4. Cartridges
    By Toby in forum Firearms, Optics and Accessories
    Replies: 33
    Last Post: 15-06-2014, 04:39 PM
  5. Need More Cartridges
    By Remington 5R .300 Win Mag in forum Projectile and Factory Ammo Exchange
    Replies: 4
    Last Post: 03-10-2013, 06:48 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!