Yeah mine wouldnt even work when I first got it.
So i googled it and adjusted all the values, I think I made the last trickle value like .3 grains, it quite often over charges so I have to watch it very closely.
For instance if you put in 41.0, it will do the charge, beep, display 41.0, then show what number its up to (say 002) and then will revert to the actual weight, and it will be 41.4.
Does that about every 3rd or 4th throw, but if I put it to trickle at .5 it wont even trickle.
Its quite a plasticy heap of shit really, quite annoyed but I'm not sending it back to the states, at least mine works sometimes though!
Also just snapped my lee turret press after about 80 loads. Not having very good luck with reloading crap.
Chris
All I can say is,fuck I am glad I bought a hornady from nz!
My favorite sentences i like to hear are - I suppose so. and Send It!
Just looking at mine and doesn't look to be much to fall apart.havnt had a.y trouble with the three around this area yet
But will keep an eye on things
My favorite sentences i like to hear are - I suppose so. and Send It!
last couple of things I have sent back was through NZ post and DHL, Much smaller but $15 & $35 but was only a box the size of the scales part.
Fishing ... Hunting its all good
Rate Finder | New Zealand Post
I just typed in 5kg, 36x32x48cm and it spat out $83.
Thats the exact size of the box that my chargemaster was shipped in, dunno about weight but have a go on it
Chris
This is certainly not a new issue with the RCBS line of auto-tricklers. I bought the RCBS auto trickler and scales when they first hit Sportways GunShed over 10 years ago. I noticed that I had this same problem with the slow trickler spout sometimes. It would faintly hum and tick, but there was no rotation on the slow spout so the charge never reached the desired setting. A full power reset and re-calibrate of trickler and scales would sometimes cure it. Weeks could pass and I'd flash the thing up and it would shit out 200 loads without an issue. Then weeks later, I'd go to use it again and have the problem. I wondered if it was moisture affecting the circuit, but on opening, found the circuit board is laquered and there were no signs of corrision or dry-joints etc. I just live with it.
Ray.
10MRT shooters do it 60 times, in two directions and at two speeds.
I take it that that is not the power sorce that came with it?
Mine runs fine on a similar sorce but slightly more mA but the std one that came with mine is 1000 mA that it came with just wrong voltage for here... maybee the amps are not quite enough with the lower speed and if thats the case you could damage the unit, Warantee could be out the window also if this is the case
Fishing ... Hunting its all good
Aparently the max draw is only around 250 ma which would be about right, Its not a very big motor in it.
I run the jaycar 9.0v 1.66A model. Just incase haha.
Chris
Bookmarks