Thread: reloading for ar15 carbine

Where do you get PPU that cheap Doc? I will run it if I can get it at that price.

It really depends on how much you want to buy... I purchased a few thousand rounds a while ago so that's bulk price. I believe gun city still stock the ppu soft point. Could be worth grabbing a couple boxes and seeing if your gun likes it.

Could potentially do an order of like 10000 odd rounds through our club

Having a hard time finding min and max loads and OAL for 2206h and the 65 gameking, can someone shed some light please?

Originally Posted by matto1234

Having a hard time finding min and max loads and OAL for 2206h and the 65 gameking, can someone shed some light please?

Just use the data for their 63gn projectile or 69gn SMK.
Don't be hung up on the OAL either. Either focus on distance from rifling or seat it to fit the mag.

Try Belmont Action Rifle Powder.

Belmont Powder | Product Categories | Belmont Ammunition

26.3gr with a Hornady 55gr SP, Murom SR mag primer shoots under 20mm in my 16" BCM @2900 fps.

Fallow, goats, wallabies no problem to 300m, cheap too

Originally Posted by Tommy

Show of hands for those loading for AR (14.5-18") .... : BM2 or 2206h?

2206H 62gr projectiles upwards.

I use 24.5gr of 2206H for my 69Matchkings (competition) and probably the same for the 65gr game kings - which i would use for hunting fallow

Work up from 24gr?

Yep. I did.

FYI, my OAL to projectile ogive was 49.76mm, which works in most AR mags.

Originally Posted by dogmatix

Yep. I did.

FYI, my OAL to projectile ogive was 47.28mm, which works in most AR mags.

Oops, was looking at my Sako .223 SGK load.

Originally Posted by dogmatix

Oops, was looking at my Sako .223 SGK load.

Sure that's not 57.28?

Nope, I measure from the Ogive, not tip.

Thanks dogmatix ill give that a go!