Thread: A then c and b??

Also, I only lube inside the neck of about every 6th or 7th case

I've tried and used most of the available lubes and if your doing bulk brass resizing then the best is Dillon in a pump spray which is basically isopropyl alcohol and lanolin. You need to tumble or ultrasonic clean afterwards.

The next best is one shot in the can (never use the pump pot one as it's different and will result in stuck cases)

Sizing wax by hornady is also good if you are doing small numbers of cases.

I ran out of imperial die sizing wax so being the bright spark I am though why not use gun oil? It's lubie and has teflon in it. I subesquently had my first three stuck cases so lesson learnt on that.