Thread: What Have You Loaded Today

I loaded some 30-30 with the 160 ftx and 32.5 gr of AR2208.


I then tested them at 100yds aiming at the black square using a rolled up coat for a rest. Good group but left so corrected and tried again.

That is excellent shooting right there

I finally managed to lob some 352 gn ribless pc (41.5gn 2207). Got 3 groups in when the wind was flat. Gotta just play the wind game when it's about and aim off. 45-70 will never be a target round but it's fun at 100m

Originally Posted by john m

I loaded some 30-30 with the 160 ftx and 32.5 gr of AR2208.
Attachment 246518

I then tested them at 100yds aiming at the black square using a rolled up coat for a rest. Good group but left so corrected and tried again.

Attachment 246519

788 strikes again

50 rounds 357 Mag. 6.5 gr Autocomp under 158 gr SWC moly-coated lead projectile. I'm interested if the point of aim changes with the projectile being moly-coated as opposed to Alox lubed lead.

30 rounds 7mm Saum - 180 ELDM over 63gn rl26 white river LR primers

Some 145gr Speers in front of WW760 for the old BSA 7x57. Need to get it shooting again after a long rest.

Some 175 eldx for the newly built 7 PRCW with vihtavuori n555. Fire forming loads into a inch at 100m.

I loaded some 500 3" BPE
I'm already on plan C for this roar and the way things are going anything could happen.

So roll up some of these and then have options for plan D, E and F




This rifle will go to entertain the guys I'm supposed to be guiding, landowner and locals

They look the goods Akaroa! What mould do you use for those?

Originally Posted by T.FOYE

They look the goods Akaroa! What mould do you use for those?

The basic Lee 450 Grain .515 mould
Sized .510 before and after powder coat

The .515 is for old worn bore 12.7s and 50-70s
But is best sized .510 if the bore is good.
All five of my vintage 50 cal rifles have good to excellent bores and like the same bullet and the .510 diameter

Just getting my brass sorted into batches before a big push to get some 22 Hornet ready for Canada Goose Culling on the New Moon

Originally Posted by Mathias

Some 145gr Speers in front of WW760 for the old BSA 7x57. Need to get it shooting again after a long rest.

Good components selection for the x 57 Mathias, how much 760 are you thinking 48 ish?


Sent from my iPhone using Tapatalk

Originally Posted by Dicko

Good components selection for the x 57 Mathias, how much 760 are you thinking 48 ish?


Sent from my iPhone using Tapatalk

Yep 48, but I have a few moving up to 50 to see how she hangs. I have done up to 52gr with a Ruger M77 with no issues at all, but I'm not chasing the fps here.

6mm Creedmoor.
108g Berger BTT over Staball 6.5
5 shots into16mm at 186m
That'll do