Thread: Whats your chosen .308 load?

150gr sst will work great as an all round load. When I had one AR2206h was my go to powder.

Originally Posted by Been Upto

Hey guys im about to enter the world of reloading soon thanks to a fellow forum member whos kindly offered to help me out. Im not sure how to mention his tag quite yet but hes a good bastard! thanks again neil. Anyway I was wondering what the other forums members have had success with in their .308 loads. Ive bought some 150grain SSTs so will start there I guess. Cheers team

That's what I run in mine mate. 46.5 grains 2206h pushes them at 2751fps out of my 16 inch tikka. Very accurate out to 500m in good conditions. That's getting hot though so definitely dont start there. I'd suggest use the ADI reloading book as a reference

44gn's 2206H, 165 SGK or SST. Accurate as, and bang flop

Thanks to all the bros who shared their loads its a good start. Cheers

I use 2206h with 165gr bullets (hornady SPs or SSTs, and will try serria hpbt some stage this year too).
Those 130 ttsx look awesome.

150gr Sierra gamekings Norma brass 2206H powder 2830fps out of 18” Tikka.

Use to use 46.5gr 2208 with Sierra 165gr hpbt gamekings and get about 2550 but lethal bush round. Have a heap of speer 125gr hps that I ran out of the 308 @ 2984fps(16" bbl) which were hilarious on varmints. Can have them cheap if you want to reload

8 posters here used ADI 2206H powder. Food for thought.

Originally Posted by Max Headroom

8 posters here used ADI 2206H powder. Food for thought.

It seems to do the job! Will have to try it out

ADI2206H works!

2206h or 2208 with 165 sst works a treat at short and long range then Leigh 168 for subs over the dog.
��

Originally Posted by Max Headroom

8 posters here used ADI 2206H powder. Food for thought.

2206 or w748 for lighties and 2208 or cfe223 for heavies.
Take up photography if you don't get joy with any of these

Originally Posted by Max Headroom

8 posters here used ADI 2206H powder. Food for thought.

It's the "go to" powder for .308 Win, that's for sure.

Barnes TTSX 130gn , federal 210 primer, H335 ~ 3000fps. Runs awesome in my 16" Kaimai MPR. I'd get your hands on a chrony so you know what is going on. Some loads online are pretty hot so watch out. I get deformation of lapua cases at 48gn.

Sent from my SM-G950F using Tapatalk

Originally Posted by kiwiswede

Barnes TTSX 130gn , federal 210 primer, H335 ~ 3000fps. Runs awesome in my 16" Kaimai MPR. I'd get your hands on a chrony so you know what is going on. Some loads online are pretty hot so watch out. I get deformation of lapua cases at 48gn.

Sent from my SM-G950F using Tapatalk

Same but 49gr in 14.5”