No one is saying the load is to hot. I think we're getting at the fact that the chrony seems to be reading very high.
22 Hornet
204 ruger
222 rem
223 rem
223 wssm
220 swift
22-250
22-243
243 win
6.5 swede
260 rem
308 win
44 RM
50 cal BMG
No one is saying the load is to hot. I think we're getting at the fact that the chrony seems to be reading very high.
Do what ya want! Ya will anyway.
That load in ADI's loading manual gives just on 3000fps that's a long way off 3600.
BURN BABY BURN
Rule 1: Treat every firearm as loaded Rule 2: Always point firearms in a safe direction Rule 3: Load a firearm only when ready to fire Rule 4: Identify your target beyond all doubt Rule 5: Check your firing zone
Rule 6: Store firearms and ammunition safely Rule 7: Avoid alcohol and drugs when handling firearms
but yes you are correct it seems way to fast than it should be
BURN BABY BURN
Rule 1: Treat every firearm as loaded Rule 2: Always point firearms in a safe direction Rule 3: Load a firearm only when ready to fire Rule 4: Identify your target beyond all doubt Rule 5: Check your firing zone
Rule 6: Store firearms and ammunition safely Rule 7: Avoid alcohol and drugs when handling firearms
How far does it say to set the super chrony away? Are you using suppressors?
Ie is it effected by muzzle blast like an optical one?
Sent from my iPhone using Tapatalk. So please forgive my sausage fingers!!!
Do what ya want! Ya will anyway.
BURN BABY BURN
Rule 1: Treat every firearm as loaded Rule 2: Always point firearms in a safe direction Rule 3: Load a firearm only when ready to fire Rule 4: Identify your target beyond all doubt Rule 5: Check your firing zone
Rule 6: Store firearms and ammunition safely Rule 7: Avoid alcohol and drugs when handling firearms
As I said I dont know much about them.
If you shot over it as instructed there can be only one thing at fault.
Gaining 50 fps second without major component changes is hard enough.
Your gaining hundreds from book values.
Let us know when you do somemore loads. I am curious and interested in one of these chronys
Sent from my iPhone using Tapatalk. So please forgive my sausage fingers!!!
Do what ya want! Ya will anyway.
I would have said .223 but after re-chambering I'm going to say .223AI
Lapua brass.
2?.5 Varget.
55 V-max.
CCI BR4 primers.
3500fps from a 22 inch barrel still at a sensible pressure.
Very little brass trimming.
Still fires parent .223 very accurately.
Going to get hold of some of the 53 grain V-max as the BC is better than the 55s and should put this loading up there with the .22-250!
If its windy I reach for the .270.
22-243 with 30g bergers at over 5200fps... Just putting it out there
If its guns, tits or tyres it's going to cost you lots of money
Does it burn out the barrels fast?
Love my 1-7, 22-243, 90 Bergers dawdling at 3100, scarey accurate way out there
My 1-14 is fun with 50-53 at 4200 & 30s at 5200, a little ballistically challenged compared to the 90s though...
I really like my 204 with 40V-max at 38-3900 but it is going to make way for my new toy
The 22-204, I'm very impressed with this chambering, it is like a 223ai on steroids, with no fireforming, simple dies, good brass
Speeds with the Oehler 35p, 53 Vmax at 3700+, 75 Amax at 3200+, 80 Amax at 3100+, 90 Berger at 2800+ all out of 22" 1-8 Tikka.
The 90 Berger wasn't stable & wouldnt shoot, I did it for speed testing & will chamber one in a 1-7 barrel soonish.
My own rifle will have a suppressed 20" barrel so will be interesting to see the velocity difference
The small case has a few advantages over the 243 case, less powder, less noise, longer barrel life, less weight
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Cant believe your 204 hasn't sold yet Greg
I'll give you $1500
Yep quite surprised myself.
I guess I should have used the usual TM discription, less than 100 rounds, 1 carefull lady owner, safe queen, only been hunting twice, etc etc
The targets probably didn't help either, as you can see, it shoots like shit.........
Thought I would have sold the 308 as well.......
Can't really see the sense in giving them away.........
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Don't really no who would want a 308 so i can understand that one not selling
Bookmarks