Thread: Tikka Problem

Here is a solution to too many T3 bolts @HNTMAD.

Bit of spray paint only takes a minute and you can colour code them (one brown, red, black, and grey). Admittedly I only have two so I have a 50/50 chance of getting it right anyway. Note the flutting runs in opposite direction on the two bolts too. And to all the smart arses out there - yes, the handles are on the correct side.

Nah the handles are deff on the wrong side 😁. All mine are diff as it is.. 284 has silver shroud and oversized bold handle, 708 has silver bolt shroud.. 243 has black shroud and 223 well it's same as 708 except bolt face. Plus they all have their own different bag they live in. It's ok OVD sorted that too

Sent from my E5823 using Tapatalk

Nice line up , you can't have to many rifles, how many days in a week? means you can swap them around for different purposes. Before you take your bolt check the 3 numbers under bolt handle are the same as the last three of your serial number .... then you know you have the correct bolt for that rifle.

You can get away with 2 bolts, 1 for the 223 and the other will fit everything else. I've got one tikka bolt for two rifles.

Originally Posted by Shearer

Here is a solution to too many T3 bolts @HNTMAD.
63807
Bit of spray paint only takes a minute and you can colour code them (one brown, red, black, and grey). Admittedly I only have two so I have a 50/50 chance of getting it right anyway. Note the flutting runs in opposite direction on the two bolts too. And to all the smart arses out there - yes, the handles are on the correct side.

You said those handles are on the correct side? mate the computer must have accidentally flipped them, I've fixed the image for you though.

Well done, now fix the rifle 😁

Sent from my E5823 using Tapatalk

You could sell a few of those bolts and buy a new Sako

Just leave the bolts in the rifles in your safe

No difference to a shotgun

Just do as we are all clear I have no issue with getting bolts mixed up. Each bag and bolt are different so i can grab a gun and a bag and go.



Sent from my E5823 using Tapatalk

Originally Posted by HNTMAD

Just do as we are all clear I have no issue with getting bolts mixed up. Each bag and bolt are different so i can grab a gun and a bag and go.



Sent from my E5823 using Tapatalk

Whats the bag for?

Has bolt, mag, ammo pouch, cleaning kit, thread cap

OCD at its best bud

There's one missing a magnum.

Originally Posted by tikka

There's one missing a magnum.

Been there done that, admit they are a man's gun, hence the 284 😁

Sent from my E5823 using Tapatalk

Four T3's what a sad cunt you are Mish mish






















Blahahaha fym

Originally Posted by HNTMAD

Just do as we are all clear I have no issue with getting bolts mixed up. Each bag and bolt are different so i can grab a gun and a bag and go.



Sent from my E5823 using Tapatalk

I know where each of my bolts are, and theres never any fear of leaving it behind or grabbing the wrong one, as they are all in their correct places in the rifles. They come out for cleaning, then straight back in and firing pins released.