Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Night Vision NZ


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 29 of 29
Like Tree34Likes

Thread: 7mmSaum test fire

  1. #16
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,747
    Looks very promising. You got to be pleased with that result.
    Like you I started with 2217 in SAUM but recently started playing around with RL23 and N560 cos sweet spot with 2217 in model 7 SAUM was down around 2880 fps (22in bbl).
    Ladders with RL23 and 160TMKs 59gn - 61.5 gn at 2975fps and pressure good, no head stamp or ejector marks, bolt lift sweet, so could go a bit higher.
    And ladder with 162AMAX and N560 61gn 2900fps, 61.5 2953fps faint head stamp, 62 gn stickie bolt.
    So next step is shoot some groups with RL23 and try some RL26, hoping to get closer to 3000fps but anywhere north of 2950 with tight wee group would be nice.
    Tahr and GWH like this.

  2. #17
    Member
    Join Date
    Jul 2014
    Location
    BOP
    Posts
    4,015
    @Tahr what twist rate is your barrel? The Tikka 695 I swapped for my old Rem has a near new T3 barrel and it doesn't seem to like the 162 gr bullets, my son's T3 is the same both 7mm Mag. The 150 gr ELDX is looking better.

  3. #18
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,737
    Quote Originally Posted by Mooseman View Post
    @Tahr what twist rate is your barrel? The Tikka 695 I swapped for my old Rem has a near new T3 barrel and it doesn't seem to like the 162 gr bullets, my son's T3 is the same both 7mm Mag. The 150 gr ELDX is looking better.
    8.7:1

  4. #19
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,737
    Quote Originally Posted by chainsaw View Post
    Looks very promising. You got to be pleased with that result.
    Like you I started with 2217 in SAUM but recently started playing around with RL23 and N560 cos sweet spot with 2217 in model 7 SAUM was down around 2880 fps (22in bbl).
    Ladders with RL23 and 160TMKs 59gn - 61.5 gn at 2975fps and pressure good, no head stamp or ejector marks, bolt lift sweet, so could go a bit higher.
    And ladder with 162AMAX and N560 61gn 2900fps, 61.5 2953fps faint head stamp, 62 gn stickie bolt.
    So next step is shoot some groups with RL23 and try some RL26, hoping to get closer to 3000fps but anywhere north of 2950 with tight wee group would be nice.
    @chainsaw Yes, 2950 and tight groups is what Im looking for.

  5. #20
    Member Kudu's Avatar
    Join Date
    Dec 2011
    Location
    Wanganui
    Posts
    1,156
    Are you going on another old farts Tahr hunt?

  6. #21
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,737
    Quote Originally Posted by Kudu View Post
    Are you going on another old farts Tahr hunt?
    Brian and me. Yes, we are old farts alright
    GWH likes this.

  7. #22
    Member Shearer's Avatar
    Join Date
    Sep 2013
    Location
    Tasman
    Posts
    7,027
    Quote Originally Posted by 7mmsaum View Post
    68g of 2217 and any projectile from the stunning 150NBT to 162 ELD-X and your good to go
    +1 for the 150NBT.
    Tahr likes this.
    Experience. What you get just after you needed it.

  8. #23
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,737
    So the results are in.

    62.5 grn R26 (starting load, mild) 2,873fps .75" - 3 shot group 160 Sierra Tipped Target

    67 grn 2217 (.5 grn under ejector stamp load) 2,859fps - .5" 3 shot group - 160 Fed Fusion

    59.5 grn Hybrid 100V (.5 grn under ejector stamp load) 3,009fps - .5" 3 shot group - 160 Fed Fusion

    All seated @20 thou.

    So the Hybrid 100V wins hands down and I will now load a batch to validate a drop chart.
    gadgetman, GWH, camo wsm and 2 others like this.

  9. #24
    Member chainsaw's Avatar
    Join Date
    Jul 2014
    Location
    Norf
    Posts
    5,747
    Nice !! that Hyb100V goes real well in short magnums
    Tahr likes this.

  10. #25
    Member outdoorlad's Avatar
    Join Date
    Dec 2011
    Location
    Christchurch
    Posts
    3,010
    Nice work, so Tahr you wont be needing all that Re26 then......
    dannyb likes this.
    Shut up, get out & start pushing!

  11. #26
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,737
    Quote Originally Posted by outdoorlad View Post
    Nice work, so Tahr you wont be needing all that Re26 then......
    I use it in my 270wsm. I have 5 tubs of it.
    outdoorlad likes this.

  12. #27
    Member
    Join Date
    Jul 2012
    Location
    Invervegas
    Posts
    5,167
    Interesting results - the CZ 7x64 that I've just traded back to @nor-west gets 2820 fps with 53.4 grains of powder with the Sierra 160gn projectile and the same sort of accuracy (from a 24" barrel it has to be said). It'll run at 2950 fps but that isn't in a node so accuracy suffers a bit at the higher speed . . . .

  13. #28
    Member
    Join Date
    Jun 2019
    Location
    Tasman
    Posts
    506
    Quote Originally Posted by Mooseman View Post
    @Tahr what twist rate is your barrel? The Tikka 695 I swapped for my old Rem has a near new T3 barrel and it doesn't seem to like the 162 gr bullets, my son's T3 is the same both 7mm Mag. The 150 gr ELDX is looking better.
    Interesting. My T3 based .284 Win with 162 ELD-X does .7 MOA 5 shots with an ex 7-08 T3 barrel at 2740 with 2213SC.

  14. #29
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    12,737
    Quote Originally Posted by Tentman View Post
    Interesting results - the CZ 7x64 that I've just traded back to @nor-west gets 2820 fps with 53.4 grains of powder with the Sierra 160gn projectile and the same sort of accuracy (from a 24" barrel it has to be said). It'll run at 2950 fps but that isn't in a node so accuracy suffers a bit at the higher speed . . . .
    Yeah, @Tentman the 280/7x64 is superbly efficient. I use 6 more grains of powder to get 3k but do have the advantage of a 22" barrel and a 5lb 10oz rifle. I like light and quick.

 

 

Similar Threads

  1. 7mmsaum
    By 25/08IMP in forum Reloading and Ballistics
    Replies: 9
    Last Post: 25-09-2018, 08:25 PM
  2. Leapers UTG 3 - 12 x 44 compact scope. Review and Test Fire.
    By Bagheera in forum Firearms, Optics and Accessories
    Replies: 2
    Last Post: 03-07-2016, 12:10 PM
  3. Rem 700, 708 into 7mmsaum?
    By llewelyn in forum Firearms, Optics and Accessories
    Replies: 13
    Last Post: 12-02-2016, 10:13 PM
  4. Test fire: shooting through tape on a suppressor
    By Bagheera in forum Shooting
    Replies: 49
    Last Post: 03-08-2015, 09:37 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!