Thread: After market mag for B14 hunter extreme

As above. Does anyone know if they make one? Having issues with mag length and seating the 165g TGK out enough. Don't want to Dremel mag. Will change to a 155g if I can't find the mag. I changed powder from 2208 to 2206H as I wanted to keep it simple. My 223 uses 2206H. It looks like the mag is too short to accommodate this load. If I single feed a longer bullet the grouping is good, I don't want a single shot 308.

How long is the current mag internally now? How much more do you need?
Do they have mag feed rails or rely on the mags themselves?
Some options as I see them
#1 Dremel mag
#2 MDT or the likes Bottom metal and run an AICS Metal mag( cavet there, notched feed ramps etc for longer non binder mags
#3 Rem700 detachable flush mag setup- Rare

Originally Posted by 300wsm for life

As above. Does anyone know if they make one? Having issues with mag length and seating the 165g TGK out enough. Don't want to Dremel mag. Will change to a 155g if I can't find the mag. I changed powder from 2208 to 2206H as I wanted to keep it simple. My 223 uses 2206H. It looks like the mag is too short to accommodate this load. If I single feed a longer bullet the grouping is good, I don't want a single shot 308. house of hazards

MDT Metal Window AR-10/SR25 Magazine is made from a billet aluminum construction and features a black anodized finish for corrosion resistance. It also has a steel spring and follower for long-lasting performance.

Cheers guys. I am probably being fussy, getting 5 shots into 1moa. Couple of options to look at.