Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Ammo Direct


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 21 of 21
Like Tree17Likes

Thread: Aperture, peep, sight for Baikal IZH-18MH.

  1. #16
    Member
    Join Date
    Jan 2021
    Location
    Kerikeri
    Posts
    333
    Yep, tried that, old eyes I think. Have made 3 different blade heights. Will post my desired height when finished mucking around. For future reference.
    Micky Duck likes this.

  2. #17
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    a meter ruler should be able to be sat in rear sight groove,lined up with guts of aperture and give you right height for blade....if you have ruler between the rear v and existing blade...the difference between it and aperture will/should be same needed for front blade..eg 2mm lower it rear need 2mm lower at front..sort of thing. looking forward to seeing your end result..my crude sights let me down today.
    75/15/10 black powder matters

  3. #18
    Member
    Join Date
    Jan 2021
    Location
    Kerikeri
    Posts
    333
    Thanks @Micky Duck. I'll give that a go. Got three blades made, hopefully one will be close.
    Micky Duck likes this.

  4. #19
    Member
    Join Date
    Jan 2021
    Location
    Kerikeri
    Posts
    333
    Name:  IMG_1606.JPG
Views: 295
Size:  4.30 MBName:  IMG_1607.JPG
Views: 257
Size:  3.14 MB @Micky Duck photo as promised. For anyone attempting the same, this is what I used. Handy bit of metal lying around, angle grinder with cutting blade, bastard file, 2mm drill bit (several actually) and small bolt cutters. Blade measures .365 from top of foresight ramp to top of blade. I cut the existing spring in half with bolt cutters (really tough bugger side cutters not up to it). Placed half spring on front screw instead of rear. Cut blade to measure so sits flush on top of rear screw and rests against rear of front screw, Half spring produces sufficient tension so blade doesn't move. Cureently shoots 3" high at 100 meters with skinner sight as low as it will go. That was with factory ammo. I'll see what it does with my home loads before I muck around anymore.
    Micky Duck likes this.

  5. #20
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,797
    hmmmm so you need bugger all more height to be just about ideal....wonder if you can somehow put a bead on top??? so you have a circular front to poke in guts of circular rear..... the hori in me says a shotgun bead threaded down into your blade..... you can get some very small beads that would be just about perfect,the drilling hole into blade top to thread it will be the challenge....
    75/15/10 black powder matters

  6. #21
    Member
    Join Date
    Jan 2021
    Location
    Kerikeri
    Posts
    333
    @Micky Duck. Probably a challenge to far, at least with my miniscule skill set. Currently groups at 3" with PRVI. Going to try my homeloads tomorrow (hopefully). See where they land at 100. Also going to have a go at dinner plate at 200 metres prone. Now that will be a challenge with the peep and that front blade. Wish me luck.
    Micky Duck likes this.

 

 

Similar Threads

  1. Aperture or peep sights for a Mauser 96
    By Wildman in forum Firearms, Optics and Accessories
    Replies: 3
    Last Post: 29-10-2013, 10:00 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!