AR Photo Only Thread

[Sasquatch]

It's actually Flat Dark Earth but white is close enough.

[res]

z5 to x5 upgrade and a better can

[bully]

If a good ar has very little movement between the upper and lower....
How do people get on with custom builds, or different uppers and lowers? Can you somehow take the play out?

[Kiwi Greg]

If a good ar has very little movement between the upper and lower....
How do people get on with custom builds, or different uppers and lowers? Can you somehow take the play out?

The accuwedge seem to work ok

I'm not sure if there is a problem to fix as the scope is attached to the upper anyway

Here is a video I haven't watched ...

[Towely]

When i put my match gun together it had zero play, really tight fit. After alot of use its developed some slop. My guess is play is inevitable, steel pins through alloy holes and alot of use equals....

[omegaspeedy]

When i put my match gun together it had zero play, really tight fit. After alot of use its developed some slop. My guess is play is inevitable, steel pins through alloy holes and alot of use equals....

I've found exactly the same. Tight combos tend to loosen up.

[Russian 22.]

If a good ar has very little movement between the upper and lower....
How do people get on with custom builds, or different uppers and lowers? Can you somehow take the play out?

My fresh build has no play. One I've handled a bit does.

Sent from my TA-1024 using Tapatalk

[Tommy]

If a good ar has very little movement between the upper and lower....
How do people get on with custom builds, or different uppers and lowers? Can you somehow take the play out?

The Gen2 Aero lowers have a wee nylon grub screw at the back to take up some slop. People really get excited about shit like that

[Sasquatch]

My Armalite M4 has quite abit of wiggle between the upper & lower but yet I can achieve very reasonable accuracy out of it. Non-free float handguard as well.

They don't call them "rattle guns" for nothing.

[Gloves]

[Shelley]

The Gen2 Aero lowers have a wee nylon grub screw at the back to take up some slop. People really get excited about shit like that

That was one of the reason I went for it, works a damn treat too!

[JoshC]

Just drop a foam ear plug (you know the orange or yellow ones) in where the 'accuwedge' goes. Does the same thing in reducing slop.

[seano]

Yea I do the same ,works really well

Just drop a foam ear plug (you know the orange or yellow ones) in where the 'accuwedge' goes. Does the same thing in reducing slop.

Sent from my SM-G935F using Tapatalk

[planenutz]

Just drop a foam ear plug (you know the orange or yellow ones) in where the 'accuwedge' goes. Does the same thing in reducing slop.

Awesome tip! Love your work.

[Beetroot]

Attachment 91767

Any reason for mounting the scope so far back?
Typically the cantilever mounts face the way and the center of the scope is above the back of the hand guard/front end of receiver.