Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ DPT


User Tag List

+ Reply to Thread
Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26
Like Tree34Likes

Thread: Bedding a 75

  1. #16
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,964
    Finally got my shit together and started this tonight.

    Drilled out holes for pillars kindly supplyed by @shift14 and hogged out the cracks .



    Devconed them in as a stage one.....this is just to locate the pillars inline with the action and once set I can remove the action(I hope ) then hog out clearances to bed the action in.



    Sent from my SM-G800Y using Tapatalk
    Wildman, gadgetman, Beaker and 3 others like this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  2. #17
    Gone................. mikee's Avatar
    Join Date
    Aug 2012
    Location
    Nelson, New Zealand
    Posts
    9,811
    i guess if the action should "stick" you could always whittle the stock back off.
    I reckon it will be ll good though
    Trust the dog.........................................ALWAYS Trust the dog!!

  3. #18
    Member
    Join Date
    May 2016
    Location
    Northland
    Posts
    356
    Lanocote for a release agent?

  4. #19
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,964
    Quote Originally Posted by Hutch View Post
    Lanocote for a release agent?
    No just is on the bench from working with ss fasteners......tho I did look at it and think about it.

    Sent from my SM-G388F using Tapatalk
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  5. #20
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,964
    Sweet.





    Sent from my SM-G800Y using Tapatalk
    madjon_, gadgetman, BRADS and 5 others like this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  6. #21
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,469
    Mint

  7. #22
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,040
    The main problem with bedding a 75 is bedding agent forcing arund the sides of the front magazine catch. Put a layer of plasticene down each vertical side of the front magazine catch.
    veitnamcam likes this.

  8. #23
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,964
    Quote Originally Posted by stug View Post
    The main problem with bedding a 75 is bedding agent forcing arund the sides of the front magazine catch. Put a layer of plasticene down each vertical side of the front magazine catch.
    Is there anywhere other than the recoil lug you tape clearances stug?

    Sent from my SM-G800Y using Tapatalk
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  9. #24
    Caretaker stug's Avatar
    Join Date
    May 2012
    Location
    Rolleston, Canterbury
    Posts
    5,040
    Any vertical surface apart from the rear of the recoil lug should be taped, which is a bastard on a 75 because there are so many!
    veitnamcam, shift14 and Carpe Diem like this.

  10. #25
    Member
    Join Date
    Jul 2013
    Location
    Papakura
    Posts
    1,999
    Quote Originally Posted by stug View Post
    Any vertical surface apart from the rear of the recoil lug should be taped, which is a bastard on a 75 because there are so many!
    As @stug said, but even tape some of the horizontal surfaces as well. I double taped the bottom of the recoil lug, and the action around the magazine cutout. My only bedded horizontal surfaces are the pads/contact areas under the action screws, and the bottom metal.

    I relieve taped the front of the recoil lug, and bedded the parallel portion of the knox forward of that.

    B

  11. #26
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,964
    Quote Originally Posted by stug View Post
    Any vertical surface apart from the rear of the recoil lug should be taped, which is a bastard on a 75 because there are so many!
    Quote Originally Posted by shift14 View Post
    As @stug said, but even tape some of the horizontal surfaces as well. I double taped the bottom of the recoil lug, and the action around the magazine cutout. My only bedded horizontal surfaces are the pads/contact areas under the action screws, and the bottom metal.

    I relieve taped the front of the recoil lug, and bedded the parallel portion of the knox forward of that.

    B
    Yea I was of course going to clearance all but the thrust face of the recoil lug and the outside vertical faces of the action but was in two minds what to do around the key like bit of the action fore and aft of the recoil lug.

    After a measure up factory has plenty of clearance on the vertical faces of that key like bit so I guess I had better replicate that.

    I never intended to fully bed it just the front and rear areas to tidy up the bedding after ripping out stock material.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

 

 

Similar Threads

  1. First go at bedding
    By Hutch in forum Projects and Home Builds
    Replies: 5
    Last Post: 18-10-2016, 09:39 PM
  2. BEDDING!
    By PERRISCICABA in forum Firearms, Optics and Accessories
    Replies: 9
    Last Post: 09-01-2016, 12:04 AM
  3. How much bedding compound?
    By gadgetman in forum Firearms, Optics and Accessories
    Replies: 6
    Last Post: 22-12-2015, 06:00 PM
  4. Dog Bedding
    By cambo in forum Hunting Dogs
    Replies: 24
    Last Post: 19-08-2012, 09:20 PM
  5. Dog Bedding
    By cambo in forum Dogs
    Replies: 24
    Last Post: 19-08-2012, 09:20 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!