Thread: Bubba what have you done?

Originally Posted by timattalon

My wifes one is really quiet without one...hard to see how it could get much quieter. No sound barrier crack, no bang just the very quiet pfft. Loudest sound is working the bolt afterwards.....or the plink when t hits the metal target....

Which rifle has she got? I've made heaps of custom suppressors for co2 and pcp rifles, I've had power tuned Crosman 2250s sounding like a dead sparrows final fart as it falls to the ground.

Originally Posted by Sasquatch

Sort of bubba-ish.

https://www.trademe.co.nz/a/marketpl...3?bof=kottvzrI

Worst part is its the price these 2250 1377 etcs are selling for now!

Originally Posted by Mintie

Which rifle has she got? I've made heaps of custom suppressors for co2 and pcp rifles, I've had power tuned Crosman 2250s sounding like a dead sparrows final fart as it falls to the ground.

Industry QB79 Accurate like I would never have believed....a cheap arse 6x32 scope and a tendency to hit a 10c piece at 25 m (best group was about the same size at 50m but drop was a bastard....) I get about 600fps going by trajectory...brilliant for plinking but I need to source a new seal for where the bottle screws in ...so a visit to paint ball supplier beckons...

Originally Posted by timattalon

Industry QB79 Accurate like I would never have believed....a cheap arse 6x32 scope and a tendency to hit a 10c piece at 25 m (best group was about the same size at 50m but drop was a bastard....) I get about 600fps going by trajectory...brilliant for plinking but I need to source a new seal for where the bottle screws in ...so a visit to paint ball supplier beckons...

Yeh some of those were great rifles! The qc wasn't the best and you need to watch the bore is concentric if getting it threaded as some were shocking! I modded a 177 one up to about 15fpe a while back.

Picked this up the other day. Someone wanted to fit a scope to it so they welded some dovetails on. Rifle has USSR stamped on it but no name.Anyone know what make/model it might be?

Sent from my SM-G525F using Tapatalk

Originally Posted by hunter Al.7mm08

Picked this up the other day. Someone wanted to fit a scope to it so they welded some dovetails on. Rifle has USSR stamped on it but no name.Anyone know what make/model it might be?

Sent from my SM-G525F using Tapatalk

Looks like a Toz-16? Single shot yeah?

Originally Posted by Rocco

Looks like a Toz-16? Single shot yeah?

Cheers mate,yes single shot.

Sent from my SM-G525F using Tapatalk

Originally Posted by Rocco

Looks like a Toz-16? Single shot yeah?

That would be my thoughts as well. Most were branded Toz but there were a few branded Baikal. Circa mid 70s to early 80s probably.

Got a photo of the butt?

Originally Posted by Rocco

Got a photo of the butt?

There ya go @Rocco . No markings that I can see. Here's the bolt if that helps?

Sent from my SM-G525F using Tapatalk

TOZ16
Had one back when I was 15 ( well I paid for it, and Dad put it on his licence )
They had an unusual smell, always thought it was the polish on the wood.
Good times

https://www.trademe.co.nz/a/marketpl...0?bof=ih2bDrIZ

Originally Posted by ROKTOY

https://www.trademe.co.nz/a/marketpl...0?bof=ih2bDrIZ

..."I have never fired this rifle"

With good bloody reason I suspect!

Originally Posted by XR500

..."I have never fired this rifle"

With good bloody reason I suspect!

Is it one of them new fangled breakdown rifles, you know, ya pull the trigger and it breaks down into 3-4 pieces.. ?

Well he has completely wrecked/ruined the stock.
It would be worth 200 but would need another stock. duh.
Not a heavy rifle to start with. Wouldnt have made it bugger all lighter with the wood he removed and utterly ruined its balance