@The bomb
Time for a photo perhaps?
An itch ... is ... a desire to scratch
Whaaat!?! Checked out Lyman 66 sights. Check out the elfunsafety warning at the bottom of the page:
https://www.lymanproducts.com/brands...ep-sights.html
An itch ... is ... a desire to scratch
Give it the hell scrub with a bronze bore brush and some sweets
Then after that clean all sweets out i use meths
Sweets will eat barrels so make sure you get it out
Then if it’s still bad plug one end of the barrel and fill the barrel with hopies no 9
And leave it for a few days
Then another hell scrubbing before wiping out
That should get it as clean as it’s gonna get
You are wasting time and effort trying to polish a turd, rebarrel it as others suggested.
Welcome to Sako club.
Yes that’s an option however I reckon if you gave it a good scurb then sluged it to determine proper bore size
It may not be.308 any more then if it needed a larger bullet like .310 or something it may just shoot ok
Us black powder shooters are always trying to get old Worn barrels shooting as we are into old guns but more often than not the barrels are Poked
At the end of the day for what it is a30-30 its a short range bush gun and it doesn’t need to shoot bung holes just get it shooting as good as you can and as long as you can keep it under 4inchs or so at 100 just use the fucker
Can get 4in at 50
Would take what I paid for it before I stripped and oiled the stock,bebbed the rear of the action and had the crown done.$345.00
Bookmarks