Thread: Custom actions

Originally Posted by Dreamer

Theres only 2 real issues with the Sako 85 .223 mag length if you want to use the longer pills and case ejection problems. The 2 .223's I've had both had the ejection issue. Either the case hit the scope casue I like them low as possible and dropped back into the open action or would just drop the case in the action.

I had this ejection issue with my sako a7 roughtech (7RM) with 3-18 vx6hd, sent it to beretta who refused to accept there is a major flaw with there rifles/ejector positions (although Robbie tiffen told me this also) and there resolution was putting it on stilts where it was ridiculously high and laughable, bottom line was they told me you can’t mount the leupold vx-5/6HD scopes on the a7 or 85, wasn’t surprised at the pathetic outcome, it’s basically the size of the turret being the issue aswell, oh and was told there action design was around well before the new leupold so it’s leupold fault... bottom line be very aware of the scope you want to mount, the height of rings before investing thousands, the a7 and 85 possibly 75 also have the design flaw, hope this helps someone out.

Originally Posted by Hen

I had this ejection issue with my sako a7 roughtech (7RM) with 3-18 vx6hd, sent it to beretta who refused to accept there is a major flaw with there rifles/ejector positions (although Robbie tiffen told me this also) and there resolution was putting it on stilts where it was ridiculously high and laughable, bottom line was they told me you can’t mount the leupold vx-5/6HD scopes on the a7 or 85, wasn’t surprised at the pathetic outcome, it’s basically the size of the turret being the issue aswell, oh and was told there action design was around well before the new leupold so it’s leupold fault... bottom line be very aware of the scope you want to mount, the height of rings before investing thousands, the a7 and 85 possibly 75 also have the design flaw, hope this helps someone out.

Interesting, I don't notice rounds hitting my scope on my 85 finnlight 7mmRm but can see where you're coming from. If you don't cycle it quick it'll drop the brass in the action though.



Sent from my SM-G930V using Tapatalk

Originally Posted by Nibblet

Interesting, I don't notice rounds hitting my scope on my 85 finnlight 7mmRm but can see where you're coming from. If you don't cycle it quick it'll drop the brass in the action though.



Sent from my SM-G930V using Tapatalk

I had zero issues with my 308 85 either tho my 75 doesnt feed as nice as the 85.

Sent from my SM-A320Y using Tapatalk

Originally Posted by veitnamcam

I had zero issues with my 308 85 either tho my 75 doesnt feed as nice as the 85.

Sent from my SM-A320Y using Tapatalk

Yeah I don't even view the dropping brass as an issue either.
It's a hunting rifle not a steel gun. Bang, quick reload in case it requires follow up, job done.

Originally Posted by veitnamcam

I had zero issues with my 308 85 either tho my 75 doesnt feed as nice as the 85.

Sent from my SM-A320Y using Tapatalk

Thats probably due to the different bolt face configuration Cam, the 85 works more like a controlled feed with that cutout on the bolt face.

I was using Talley lows and the brass would hit the windage turret and drop back into action, loaded or empty round didn’t matter, wasn’t even close to a clean ejection, although it doesn’t seam consistent with others, the issue is there and good to be aware of.

.

Sent from my SM-G390Y using Tapatalk

Originally Posted by Mathias

Thats probably due to the different bolt face configuration Cam, the 85 works more like a controlled feed with that cutout on the bolt face.

Yep exactly.

Sent from my SM-G390Y using Tapatalk

Originally Posted by Gibo

Bro they aint going to give them to you cheaper by bleating their praise 8 times a day

I didn't even bring them up this time!

None of the Sakos I’ve had have done that, even with rails on top over the ejection port

Are you after an action for a light weight hunting rig?

Originally Posted by Nibblet

Are you after an action for a light weight hunting rig?

No I’m idly considering the ideal of making a semi-weight fast-twist .223 as a home for my PMII and for LR futzing, probably
just using a full-size used Howa short action from somewhere + Wilddog stock that is in my safe + custom barrel + mag kit with Accurate Mags for decent COL.

Originally Posted by gimp

No I’m idly considering the ideal of making a semi-weight fast-twist .223 as a home for my PMII and for LR futzing, probably
just using a full-size used Howa short action from somewhere + Wilddog stock that is in my safe + custom barrel + mag kit with Accurate Mags for decent COL.

Just order a Carbon Wolf in 6.5 Creedmoor. I want to know if they are good

Sent from my SM-N950F using Tapatalk

My 600m F-tr is a .223 short action howa with rifle basic trigger, GRS berserk stock and Pacnor ultra-match 1:8 twist barrel

Originally Posted by gimp

How’s the tolerances on Barnard for field use?

I don't have a problem.
Remington style Kelvin elite trigger. Weight doesn't worry me either, long range single shot. Very, very accurate.