Thread: DNZ Gamereaper mounts

Who is using them? D they go alright??

I am looking at using the 300mm low ones to mount a vx3 on a tikka

Cheers guys ( and girls )

I mounted loads of these while working in Canada, good simple sytem. I would personally (I have) use Talley rings (Low) for a T3 as they are roughly the same cost and have a lot less bulk to them, plus they give you more options for how far back/forward you can mount the scope. Both systems are very simple to install.

Gunworks Ltd - 30MM Tikka T3 Black

Other than that go Sako Optilocks but they are a bit expensy.

Great mounts, strong and light and align very very well made. Long mount screws so you will be unlikely to strip the threads, I didn't need to lap the rings at all with a perfect fit.

Scope position is limited so if you have a scope with long or short eye relief it can cause issues, I had to go Talley when I changed scopes to one that has 4" of eye relief and while they are light they are not as well made. I had to do a fair amount of lapping to get a perfect fit on the Talley rings.

as above, if they fit your scope they are really good and rock solid

Thanks guys, will bring back both the DNZ and some talleys, whatever doesn't fit can go on here at cost

Any one happen to have a VX3 r sitting in them 4.5-14x40?