Thread: DPT over barrel modular suppressor

Originally Posted by Bill999

I couldnt comment on recoil reduction with mine bieng on a ar15 which recoil very little.

what will ya do a over barrel back chamber bit for to replace my muzzle forward one?

Yes when they are back in stock, will be about $260 for the rear section.

Thanks

Hey DPT,

Just wondering what thread I should use on a Savage Weather Warrior 22-250... they have a sporter barrel and I was looking to use your modular Can...

Thoughts?

Hi,

What is the diameter of the muzzle?

DPT

Originally Posted by DPT

Hi,

What is the diameter of the muzzle?

DPT

Should be about 15mm. Mine (308 and 243) are 1/2"-20. Realistically the 'meat' that holds the suppressor in place is from the bottom of the threads to the bore and is the same no matter what the O/D of the barrel is; that just determines the size of the surface the suppressor gets tightened against.

If 15mm muzzle then id go with 1/2-20 or 1/2-28. If bigger than 15.4mm then id go with 9/16-24.

DPT

Originally Posted by gadgetman

Should be about 15mm. Mine (308 and 243) are 1/2"-20. Realistically the 'meat' that holds the suppressor in place is from the bottom of the threads to the bore and is the same no matter what the O/D of the barrel is; that just determines the size of the surface the suppressor gets tightened against.

Your best to go with the biggest thread you can on a barrel, if the barrel is say 17mm then 1/2 thread is way too small.

DPT

Thanks Gadget!

I'll get it measured up, still currently in the UK until the 28th Sept then I'll be on my way home and want to have that sweet little DPT Can sorted for some MUCH NEEDED blasting of naughty little Furry things as it's been 6 months since I last held a rifle...

DPT, I'll order via your web site so you dont pay the TM fees!

Thanks for your help folks!!

OK DPT!

Ordered Via web site.. I have popped a note on there not to make it until I can advise thread size. Should be very soon!
Excited.


Went for the 5 baffle system as advised by you.

thanks

14.5 mm muzzle so what ever thread you reccomend!

The can is an excellent product!

Quick Video done by a mate..
DPT Modular Can - YouTube