Thread: Effect of suppressor on performance of a given load...

yea. got the boss system fitted to my remmy to do that, it certainly makes a difference

Ive always been intriqued to try a muzzle tuning device - figured doing it with a suppressor is like killing two birds with one stone.

just my 2 cents, added suppresors to all our rifles , all shoot the same or better, with a very slight differenec in POI , none have shot 'worse' for it

Originally Posted by LJP

Ive always been intriqued to try a muzzle tuning device - figured doing it with a suppressor is like killing two birds with one stone.

Iv got a barrel friendly .222 comming up, I might have a play around with a can and some spacers see if it makes any difference.
Question would be how far would it need to move to have an impact? Migh need a longer thread?

Muzzle tuners are quite common in the smallbore they do work well if you have the time to fiddle an play.

They all where very fine thread an had adjustments like a micrometer so you could easy adjust in between different batches of ammo etc.

Sent from my GT-I9300T using Tapatalk 2

The thread for my boss system is around an inch long with a fine thread. Calibre is 7rm.
The cunt bit is they come loose from time to time. And mine has no hash marks. So you have to count the turns. otherwise great. No load development needed