Thread: Gun City Japanese Arisaka type 38s

Originally Posted by Cordite

No different, outcome, except it might have been harder to extract the split shell. The Type 38 has top vent holes in the receiver, and an ingenious way to allow gases entering the bolt around the firing pin to travel backwards only to eventually be redirected forwards by the rear cap / palm safety. It effectively has four locking lugs, two primary, two secondary. In addition to two strong locking lugs, it also has (1) port side spare locking lug (hits against the bolt stop on port side, to avoid wearing the business surface of the port locking lug) and (2) the bolt handle on the starboard side, functioning as a rear locking lug.

Some additional protection to shooters eyes from the dust cover. It would stop direct debris from the top of the bolt travelling directly back, but might let some gases travel backwards underneath it. A really big bang up front would likely lift up the front of the dust cover, but it would stay attached at the rear and thus still deflect stuff from going straight back.

The thing is over engineered. Estonia even re-bored Type 38s from 6.5mmx51SR to 7.7x56R (.303 Brit).

No such thing nothing like a little belt and braces

Originally Posted by Cordite

@SEdan

Any interesting details emerged from your talk with the guys?

Hey mate - sorry, I haven't been on this forum in ages, so I apologise for any late responses to anything.

I did have the chat, but the information was basically as I'd already mentioned. They were movie props that we acquired ex-Australia, from a film armorer. This is why some have been re-chambered (for blanks).

There really isn't any more information I was able to glean i'm sorry!

Love my 2 Arisakas...well put rifles.

Nice havnt seen one with the bipod before.

Originally Posted by Marty Henry

Nice haven't seen one with the bipod before.

Never mind the dust cover! Early T38s had the monobipod too.

They are all cock-on-close like the Lee Enfield (and early Mausers) so lend themselves to lighter two-fingered bolt operation. I checked, you can JUST operate the straight bolt with thumb/index finger and fire with middle finger for rapid sequence shots. With the bent bolt of the sniper versions this would feel just natural. Never seen this mentioned in write-ups about Arisakas.

Anyone know how much gunsmiths charge to bend a bolt handle?

Arisaka 99

Sent from my SM-G965F using Tapatalk

The fold out rear sight wings are notched for anti-aircraft...100, 200, 300 nautical miles from memory. https://youtu.be/y2EkEsvwARE

Originally Posted by Tikka7mm08

The fold out rear sight wings are notched for anti-aircraft...100, 200, 300 nautical miles from memory. https://youtu.be/y2EkEsvwARE

Better not go hunting on DOC land with it, they'll get you arrested on suspicion of eyeing 1080 helicopters. (-:

Ha, I doubt I'll ever fire it.

Here is my collection...I think I've got the main bolt actions from WWII. The MAS36 and Springfield 06 were the hardest and last to get. The folding Carcano bayonet I managed get through EBay luckily, it is my favourite bayonet.

I never tire of seeing it.

Finally got it to post right way up. I should take a photo of the helmut of the left. WWII Japanese with the soldier's name beautifully etched in Kanji.

Great representative collection. @Tikka7mm08 is that a bazookathingame?

on the first picture whats the rifle thats shown vertical ?

It is a 3" mortar tube. I have the brass WWII sight as well...very cool. Thinking of selling mortar stuff and just having rifles and WWII handguns when B cat comes thru.