Thread: Gun city Rimfire Silencer 22CAL Economy

The one that came on my jw is tiny plastic had couple thou of hv threw it and is still quiet as with subs.

No baffles or washers.

Sent from my GT-S5360T using Tapatalk 2

Originally Posted by Toby

Pull it apart and have a look where it came from. Should be 2-3 springs and 3-4 washers

Yeah bro pulled it apart wasn't any washers.. The was heaps of crap.. How often do yous clean them?

Is that bits of lead or gravel or what?

Sent from my GT-S5360T using Tapatalk 2

Thats alot of shit. Only just got mine its springs and washers. I cleaned the killwell one once just soaking the bits in brake cleaner

Originally Posted by veitnamcam

Is that bits of lead or gravel or what?

Sent from my GT-S5360T using Tapatalk 2

Pretty sure it's just lead can't think of anything else it could be, but that was only half of it! And Iv only put about 250 rounds through it!

Originally Posted by thomas

Pretty sure it's just lead can't think of anything else it could be, but that was only half of it! And Iv only put about 250 rounds through it!

Is it shooting alright? Does it shoot better with it off?
Bits of lead in there would suggest a missalignment somewhere and bullet is hitting part of the suppressor.

Sent from my GT-S5360T using Tapatalk 2

2nd pic looks like some mason bees have had there nest shot up haha

Originally Posted by veitnamcam

Is it shooting alright? Does it shoot better with it off?
Bits of lead in there would suggest a missalignment somewhere and bullet is hitting part of the suppressor.

Sent from my GT-S5360T using Tapatalk 2

Yeah. Well I thought it was! 50m I was getting good groupings.. But I then went on to shoot from 75,100,150m.. But I was shooting those distances with out the silencer.. But yeah beats me. Ill have to have a look next time I go shooting and see if it fills up again.. Would it be worth risking using the silencer if its not aligned properly?

Here's a better look of the inside

Did you buy it new?

Look for any damage where the bullet passes or put it back on the barrel and look through to see if anything is in the way. Or a cleaning rod or something

Originally Posted by Toby

Look for any damage where the bullet passes or put it back on the barrel and look through to see if anything is in the way. Or a cleaning rod or something

Yeah doesn't look like there's any damage so ill just wait and see.. But yeah it was band new from gun city it came with the rifle..

Yeah doesn't look like there's any damage so ill just wait and see.. But yeah it was band new from gun city it came with the rifle..

Here's mine

Like this thomas, lock open the action put a white bit of cardboard or paper there and shine a light into it, should make it easy to see when you look down the barrel if anything is in the way.