Thread: Gun Porn, show off your new toys

Originally Posted by dogmatix

I picked this Lithgow SMLE No 1. MK III* up from a forum member.
I’m going to debubbfy it, ie restore it back to full wood.
As you may know, the replacement SMLE wood is hard to find.
I have a repro set on order and a permit request in for the missing parts.
In the meantime I took it to the range yesterday and fired it for the first time.
First iron sights shot with factory S&B 150gn softpoints was 2 inches left and 1 inch low.
The rain then came down and my next shots dropped a bit, but she’s going to be a good’un.

Attachment 123717

Attachment 123718

Attachment 123719

That action looks brand new!

Originally Posted by veitnamcam

That action looks brand new!

Sure does.

Latest evolution of my rifle, thanks to some good buggers on here @stug @Ryan_Songhurst @matagourie there's a few more things I'd like to do but in it's current setup it's 3.021kg including scope, rings, bolt and magazine
Specs:
Sako a7 action 270WSM
Sako finnlight barrel
Hardys titanium brake
LEUPOLD 4.5-14×42 vx3 CDS
Stug stock

Originally Posted by dannyb

Latest evolution of my rifle, thanks to some good buggers on here @stug @Ryan_Songhurst @matagourie there's a few more things I'd like to do but in it's current setup it's 3.021kg including scope, rings, bolt and magazine
Specs:
Sako a7 action 270WSM
Sako finnlight barrel
Hardys titanium brake
LEUPOLD 4.5-14×42 vx3 CDS
Stug stock

Attachment 124007

Attachment 124008

Attachment 124009

Attachment 124010

I'd like to do that to my A7, hopefully @stug will take orders again at some point

Sent from my SM-G960F using Tapatalk

Originally Posted by dannyb

Latest evolution of my rifle, thanks to some good buggers on here @stug @Ryan_Songhurst @matagourie there's a few more things I'd like to do but in it's current setup it's 3.021kg including scope, rings, bolt and magazine
Specs:
Sako a7 action 270WSM
Sako finnlight barrel
Hardys titanium brake
LEUPOLD 4.5-14×42 vx3 CDS
Stug stock

Attachment 124007

Attachment 124008

Attachment 124009

Attachment 124010

Thats a Greystone brake Mate

Originally Posted by Kiwi Greg

Thats a Greystone brake Mate

Whoops right you are

Not new, I've had this Tikka M595 in 284win for a few years now but havnt used it for some time. I use to run mag fit 150gr NBTs at 3k as a do it all hunting load and it worked very well.

I've just got it back together after getting the FIL to rethread the muzzle and fit a T2 muzzle brake to it, in preparation for playing with some 180gr eld-m's.

This chamber has always been throated pretty long. I can seat the 180s right out in the neck only no problem at all, giving me maximum powder capacity, obviously single feeding thou.

Quickload indicated that RE26 will get the 180s going pretty well from the 22 inch barrel, approx 2850 fps. So I've got some coming.....

In the meantime the 2nd best powder according to my modeling in QL was the good old IMR 7828ssc which I have and use in other cartridges with heavy for cal bullets.

I loaded up a 5 round ladder test in .5gr increments up to 58gr.

Today I got to fire them over the chrony and it's showing some promise.

58gr was too hot with a slight ejector stamp and giving 2840 fps.

I had another 3 rounds loaded at 57gr which I fired at 300 yards, which printed right on 2 inch in reasonably bad mirage.

They were doing 2795 fps.

Pretty reasonable LR ballistics for just 57gr of powder and a 22 inch barrel I reckon.

The ballistic chart is assuming 600m elavation and at a muzzle velocity of 2795 fps. 1,350 ft lbs and 1,800 fps at 1000 yards is pretty impressive I reckon.

Sent from my SM-G930P using Tapatalk

Two new to me ones for CAS. Rossi 12g and an uberti 1973 in .357

Originally Posted by NZ32

Two new to me ones for CAS. Rossi 12g and an uberti 1973 in .357

Attachment 124032

Hundred years out on the rifle


Sent from my iPhone using Tapatalk

Originally Posted by MSL

Hundred years out on the rifle


Sent from my iPhone using Tapatalk

oops, don't write 1873 much

Originally Posted by NZ32

oops, don't write 1873 much

You need to get yourself a short stroke kit for it, they are awesome


Sent from my iPhone using Tapatalk

I'm starting to see a feint pattern here, but not 100% sure what it is yet

Originally Posted by ebf

I'm starting to see a feint pattern here, but not 100% sure what it is yet

Attachment 124877

Are they all warranty replacements??

Originally Posted by Tahr

Are they all warranty replacements??

Naa, once I find something that works I tend to stick with it Giles is on my speed dial, hehe.

Just need to import a couple more Aluminas so they all match.

Originally Posted by ebf

I'm starting to see a feint pattern here, but not 100% sure what it is yet

Attachment 124877

Mint lightweight hunting scopes

Sent from my CLT-L09 using Tapatalk