Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Ammo Direct DPT


User Tag List

+ Reply to Thread
Page 4 of 5 FirstFirst 12345 LastLast
Results 46 to 60 of 70
Like Tree40Likes

Thread: Hight Value(cheap) Suppressors

  1. #46
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,287
    Quote Originally Posted by stub View Post
    Silenz is dean maiseys suppressors I'm pretty sure
    Yep.
    Found that with google:
    http://www.iponz.govt.nz/app/Extra/I...61230677425789

  2. #47
    Member oneshot's Avatar
    Join Date
    Oct 2014
    Location
    Upper Hutt
    Posts
    934
    Quote Originally Posted by Proudkiwi View Post
    Gunworks cans are terrible and HRE's might blow your face off but will be quieter than the GW one up till that point.
    Nothing wrong with my Gunworks Maximus, cant rate it highly enough. Like all things though different opinions will vary.
    Never argue with stupid people, they will drag you down to their level and then beat you with experience.

  3. #48
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,287
    Sorry try that:
    http://www.iponz.govt.nz/app/Extra/I...61663500028426

    Design 419024 if that link does not work

  4. #49
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,287
    It just shows the registered design on the patent office and who owns it.
    The links don't seem to work sorry.

  5. #50
    Member
    Join Date
    Nov 2014
    Location
    Christchuch New Zealand
    Posts
    6,072
    I have two Gunworks and an old MAE. I had one Gunworks spartan on my 30/06 and was so happy with it that I had no hesitation in getting another one for my 7mmRemMag. The rifles both had different threads so I was always getting another suppressor. I am looking at replacing the MAE on my 223 as it is nearly 3x as heavier than the Gunworks one. (Age and design and I do not blame MAE). I have not used D Maiseys or DPT or Hardy but all have their following and I am certain they are well suitable for purpose so am disappointed in the nay sayers that allude to safety issues with any of these brands including gun works. In all the brands of suppressors we have come into contact with, only one brand has ever managed to scare us with it design and flaws. (SSS AKA Rev Rog)

    I am sure there are others out there worth mentioning. But personally I will stick to Gunworks as I have used them, I like them, I feel they are value for money and they have never let me down. And their service is great.

  6. #51
    Member
    Join Date
    Mar 2012
    Location
    Hastings
    Posts
    2,635
    If you get a DPT think about an extra baffle.Whilst no audiologist it seems quieter than standard. We have 3 of them on our 223's.

  7. #52
    By Popular Demand gimp's Avatar
    Join Date
    Dec 2011
    Location
    The Big H
    Posts
    9,479
    Quote Originally Posted by 300CALMAN View Post
    That's the price of having some stainless internals. DPTs earlier AR15 suppressor had this so it could withstand some rapid fire. Apparently they are no longer made? You will note from DPTs current adverts that "Baffles are 100% Duralium aluminium and not designed for rapid fire as the heat and sand blasting effect will wear them out at a faster rate"
    I am not sure what constitutes rapid fire.. but I guess the story is alloy is OK for your .22 or big game rifle but If you have a semi or shoot a lot of animals (gOATS for example?!) you probably need steel parts. OR Titanium maybe if you can afford it.
    Suppressors are cheap wear parts, I'd rather have a lighter one and wear it out faster. Baffles are replaceable.
    Blaser, Toby, Dr. Watson and 1 others like this.

  8. #53
    ODL
    ODL is offline
    Member
    Join Date
    Jan 2013
    Posts
    83
    Quote Originally Posted by Digit View Post
    Ahh well... I'll reinstate my original wish...

    ...Imagine if ODL made a budget alloy suppressor based on the suppression development he's done with titanium...
    Cheers for the confidence, Digit! I have costing underway and a design half finished. The design goal will be a reasonable priced can that sounds good and is light for bolt action rifle rate of fire. I will be using a number of methods to keep costs down while producing a quality product rated for this rate of fire.
    gimp and Digit like this.
    Oceania-Defence.com

  9. #54
    Member
    Join Date
    Dec 2014
    Posts
    568
    Talking durability, what is a better option, DPT or Gunworks, Im not really worried about weight, more concerned about durability and performance. I think the magnum DPT comes in at 300gms and the Gunworks maximus mega weighs in at 700gms.

  10. #55
    Member
    Join Date
    Jan 2013
    Location
    Christchurch, New Zealand
    Posts
    68
    Quote Originally Posted by JRW87 View Post
    Talking durability, what is a better option, DPT or Gunworks, Im not really worried about weight, more concerned about durability and performance. I think the magnum DPT comes in at 300gms and the Gunworks maximus mega weighs in at 700gms.
    Whilst not the quietest out there - Gunworks cans are a incredibly simple design, it would take an insane amount of shooting to wear the baffles out, and if you did you could replace them in about two minutes.
    JRW87 likes this.

  11. #56
    Member
    Join Date
    May 2014
    Location
    Auckland
    Posts
    983
    If you are not worried about weight and want solid quality build with top sound suppression I would recommend MAE stainless, they are very good.
    When putting suppressors on rifles if you are going to be doing a lot of shooting from standing or other unsupported positions the balance of your rifle needs to be taken into consideration as well. I changed from my MAE to a DPT for this very reason as it brought the balance of my rifle(.308) back for quick standing or sitting shots. If I was shooting off a bipod or pack longer range all the time would have kept the MAE on.
    Darren DPT readily told me to suppress the DPT(standard) up to the MAE I would need to add probably 2 more baffles to standard. Maybe try at some stage but quite happy at the moment as rifle shoulders perfectly.
    Think this speaks highly of Darren(DPT), as I think all these different suppressor manufacturers offer different things it depends what you are after, its a bit apple and oranges sometimes rather than making direct comparisons. These small kiwi companies making them all seem keen to improve all the time and they appear to be doing so.
    I would love to try an Oceania on my AR as they do look like the Porsche of suppressors, but my $199 DPT forward mini works fine.
    My 30 cal MAE is parked and will eventually find a home on a shortest possible barrel 300AAC either AR or bolt gun where it will be superb.
    Seen quite a few gunworks and they seem to go well but my personal preference is for the DPT design rather than run right back and option to add more baffles or reduce as you wish to suit.
    Would be keen to hear how these Silenz ones go as like the idea of the brake/suppressor. Could it possibly also further utilize back part of can, as my understanding most of the work is done in the front, past muzzle bit? Weight does look like getting back up there again though, (cake and eat it scenario again....)

    I am also interested in when people are swapping suppressors between calibres are they just doing the obvious and have same thread types? Or are they using some sort of thread adapters as going from small calibres to larger a gunsmith would normally use a different thread? Or would it not be in suppressor manufactures interests to encourage this as would reduce sales?
    JRW87 likes this.

  12. #57
    Rob von tempsky fan's Avatar
    Join Date
    Apr 2012
    Location
    Te Puke
    Posts
    908
    I'm getting a Dpt magnum can fitted atm by truflite while he does some other stuff for me. I'll be interested in how it holds up to the 300 win mag , and the difference between the Hardy mag can i use currently.

  13. #58
    Member specweapon's Avatar
    Join Date
    Apr 2013
    Location
    Tasman
    Posts
    1,042
    I have a DPT overbarrel on my AR and really rate it, but recently a mate bought a Howa 308 and I pushed him to get a Sonic suppressor for it, trying it on my AR it's noticeably quieter than the DPT, and the same price and weight. The only difference is that the Sonic baffle holes are sleeved with stainless inserts that are meant to reduce wear from use, I wonder if my DPT is getting less effective as it's showing some wear on the baffles, the Sonic also has some sort of spiral device at the barrel that's meant to spin the air???

  14. #59
    Member
    Join Date
    Jun 2013
    Location
    Middle Earth
    Posts
    4,287
    SONIC SILENCERS :: technical

    Weight wise they are 16.8 oz= 476 grams. A DPT weight weight 260gr in its basic configuration.
    And the steel inserts tend to rust if not well maintained as I have discovered recently :-(

    For the spiral brake inside, it is meant to help the suppressor self tightening on the barrel.
    You can try the following experiment with your mate suppressor: unscrew the suppressor by 1/2 a turn. And shoot through it to see if it tightens against the shoulder of the thread...It would be interested to see if it works

  15. #60
    DPT
    DPT is online now
    Member
    Join Date
    Mar 2012
    Location
    Hamilton
    Posts
    514
    Quote Originally Posted by specweapon View Post
    I have a DPT overbarrel on my AR and really rate it, but recently a mate bought a Howa 308 and I pushed him to get a Sonic suppressor for it, trying it on my AR it's noticeably quieter than the DPT, and the same price and weight. The only difference is that the Sonic baffle holes are sleeved with stainless inserts that are meant to reduce wear from use, I wonder if my DPT is getting less effective as it's showing some wear on the baffles, the Sonic also has some sort of spiral device at the barrel that's meant to spin the air???
    The sonics are twice the weight of mine, mine are 260grams for the over barrel and 192grams for the muzzle forward. where the sonic is about 450grams, I have never done any sound tests against the sonic but if it is quieter all you need to do is add more baffles to bring the sound down, and it will still be lighter.

    Unless your baffles are completely warn out then it wont be effecting the sound reduction, you are looking at around 2000 rounds on the first baffle to get to that stage.
    Last edited by DPT; 28-05-2015 at 09:26 AM.
    Digit, BRADS and PERRISCICABA like this.

 

 

Similar Threads

  1. 22 suppressors
    By rambo-6mmrem in forum Firearms, Optics and Accessories
    Replies: 17
    Last Post: 21-03-2015, 10:18 PM
  2. NZ Suppressors
    By riflegus in forum Firearms, Optics and Accessories
    Replies: 6
    Last Post: 11-03-2014, 09:06 AM
  3. 338 suppressors
    By 7mmsaum in forum Firearms, Optics and Accessories
    Replies: 65
    Last Post: 16-08-2013, 06:25 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!