Thread: My new custom 28 Nosler

Originally Posted by Pongo12

Have you had a play yet mate?
Any updates on the load d?

I've only been able to get out once so far.

I fired 7 rounds thru it end of last week.

A 5 shot Ladder test at 100 yards, then 2 extra rounds in middle of the ladder at 300 yards.

87 and 88 gr went in one hole at 100 yards, no signs of pressure at all at 88gr. 88gr gave 3080 fps. Round edge still on primer no stiff bolt or marks on case head etc.

The two 86gr rounds shot a fraction over 1 inch at 300 yards, but I'm thinking it's going to like 87-88 gr far better from the ladder results.

I've got the rounds loaded up for the 2nd stage and hope to shoot them tomorrow over the chrony at 300 yards.

I was hoping to find accuracy somewhere between 3050 and 3100 without having to push it hard. Which from the 7 shots fired so far it looks like I will be right in there.

Looking forward to group testing at 300 and es testing this next lot of rounds.

Sent from my SM-G900I using Tapatalk

Bloody awesome ya going well. Mean looking weapon alright

Nice mate! I reckon around 3,100fps is a pretty good speed for the 195's. Makes good use of the available case size.

My brother and I both have 7mmFX's (7mm-338 Lapua Improved) which have a chunk more capacity. Just finished swapping from the 195's to 180's in my brother's FX. The 195's weren't surviving the speed (3,250fps) and compared to what we can push the 180's (3,440fps in mine) at very comfortably, the 195's weren't giving any advantage...

Sent from my SM-N950F using Tapatalk

Originally Posted by The Claw

Nice mate! I reckon around 3,100fps is a pretty good speed for the 195's. Makes good use of the available case size.

My brother and I both have 7mmFX's (7mm-338 Lapua Improved) which have a chunk more capacity. Just finished swapping from the 195's to 180's in my brother's FX. The 195's weren't surviving the speed (3,250fps) and compared to what we can push the 180's (3,440fps in mine) at very comfortably, the 195's weren't giving any advantage...

Sent from my SM-N950F using Tapatalk

Yeah I think 3100 won't be too hard at all, I've loaded 5 rounds at 88.5gr to test too I'm picking they'll be just north of 3100.

I'm also expecting things to speed up a bit once it has a few more rounds thru it, most normally need to back the load off a bit to keep same velocity/node after break in.

I do have a couple of boxes of 180 eldm's to also try. I'll stick with whichever shoots the best.

I don't think animals will know the difference. And the numbers on the 180's look better which is odd eh.

Sent from my SM-G900I using Tapatalk

Love that high tech rear bag. anything around or north of 3000fps with the 195s is going to get you a loooooong way down range.

@GWH Whats your initial thoughts on the Athlon?

Originally Posted by wsm junkie

@GWH Whats your initial thoughts on the Athlon?

Yeah so far so good, havnt really given it much of a test yet tho. But it's nice and clear etc.

Today might be the day for the range again @GWH ? The sun is back out (at least it is here). Craig and I are off for an evening hunt...carrying our little 300saum and 284 pop-guns

Originally Posted by Tahr

Today might be the day for the range again @GWH ? The sun is back out (at least it is here). Craig and I are off for an evening hunt...carrying our little 300saum and 284 pop-guns

You get into them!!!

Yep just getting the gear in the truck now mate

Sent from my SM-G900I using Tapatalk

I had a good session at the range yesterday with the 28.

A bit of group testing at 300 with the 195 bergers to fine tune the powder charge.

Then shot the last two rounds (at top end of powder weights) at 400 yards.

They printed just over an inch apart, (.27 moa) and fair flinging along at 3175 fps, still no signs of excess pressure at all.

But i dont really need it that fast and its just as accurate down at 3080, so will look to run it there and hopefully get better brass and barrel life.

Now to fine tune the seating depth. I've only fired 26 rounds so far, so happy with progress at this point.





Sent from my SM-G900I using Tapatalk

You’d have to be very happy with that

Originally Posted by 199p

basically its anywhere from 500 - 1500 rounds you could cook it in 30 rounds if you were superkeen

Speaking from experience with big 7mms on that one eh bro

Sent from my SM-G960F using Tapatalk

Originally Posted by BRADS

Speaking from experience with big 7mms on that one eh bro

Sent from my SM-G960F using Tapatalk

Sure am hahaha

Sent from my SM-G935F using Tapatalk

Put your video up mate

@GWH how did your load and rifle go after fine tuning?