Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Ammo Direct


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 30
Like Tree40Likes

Thread: Reasonable first baffle wear?

  1. #1
    Member
    Join Date
    Mar 2018
    Location
    Turangi
    Posts
    1,373

    Reasonable first baffle wear?

    I tried to send this pm to @DPT but it is not allowing me to send picture. And we all know without pictures....

    What would be considered a normal amount of wear on first baffle of over barrel dpt can from a 17in .243 barrel shooting 80 & 100gr factory ammo (Winchester super x)?

    I will definitely be purchasing a s/s baffle as soon as funds allow so that is something I am already aware of.

    Just wondering if this seems excessive for 20-25 rounds, mixed 100/80gr?

    P.s suppressor is awesome and very happy with its performance so this is not a gripe, just after info as do not have a lot of experience with them.

    Name:  20181231_161646.jpg
Views: 854
Size:  1.97 MB
    Last edited by Preacher; 31-12-2018 at 04:42 PM. Reason: Double parked pictures

  2. #2
    Member
    Join Date
    Dec 2013
    Posts
    603
    The 'problem' with modular suppressors is that you can open them up and have a look. If it was a one piece unit, you wouldn't know and you wouldn't worry about it ...
    7mmsaum, Kiwi Greg, tetawa and 1 others like this.

  3. #3
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,822
    looks to me like you have cleaned it...there is no white powdery stuff around it....like mine has,told to leave it there as it helps to slow down wear.

  4. #4
    Gone................. mikee's Avatar
    Join Date
    Aug 2012
    Location
    Nelson, New Zealand
    Posts
    9,816
    You got me curious so I opened up mine
    16 Inch Barrel .375WSM @ approx 200 shots (250gn bullet at approx 2500FPS)
    Name:  375WSM 250 rounds approx.jpg
Views: 603
Size:  375.2 KB
    6.5SAUM 26 Inch Barrel @ approx 450 shots (143gn bullet at 3100fps)
    Name:  6.5SAUM Suppressor 400 rounds.jpg
Views: 608
Size:  317.0 KB

    but the one I am most interesed in is my 6.5TCU Suppressor as its done the most work @ 2050 rounds (123gn bullet at 2550fps) however I am unable to remove the first baffle as it has Stuuck and wont undo, and the pics are slightly off centre

    All Are DPT, the man makes a good product
    199p, Micky Duck and takbok like this.
    Trust the dog.........................................ALWAYS Trust the dog!!

  5. #5
    Member
    Join Date
    Mar 2018
    Location
    Turangi
    Posts
    1,373
    Just gave it a quick wipe with a paper towel. I'm sure it's fine just kinda got a shock with how much it looks hammered already.

  6. #6
    DPT
    DPT is offline
    Member
    Join Date
    Mar 2012
    Location
    Hamilton
    Posts
    521
    Quote Originally Posted by Preacher View Post
    I tried to send this pm to @DPT but it is not allowing me to send picture. And we all know without pictures....

    What would be considered a normal amount of wear on first baffle of over barrel dpt can from a 17in .243 barrel shooting 80 & 100gr factory ammo (Winchester super x)?

    I will definitely be purchasing a s/s baffle as soon as funds allow so that is something I am already aware of.

    Just wondering if this seems excessive for 20-25 rounds, mixed 100/80gr?

    P.s suppressor is awesome and very happy with its performance so this is not a gripe, just after info as do not have a lot of experience with them.

    Attachment 101814
    If I was sent that picture with no background info and asked how many rounds it has had through it id say maybe 800 +. A s/s blast baffle would definitely stop that.

    Ideally an email should be sent to us and we can discuss this further sales@dpt.co.nz keeping in mind we are on holiday for two more weeks so I will reply as soon as I can

    Thank you
    DPT
    6x47, lau lau, Tommy and 4 others like this.

  7. #7
    DPT
    DPT is offline
    Member
    Join Date
    Mar 2012
    Location
    Hamilton
    Posts
    521
    Quote Originally Posted by DPT View Post
    If I was sent that picture with no background info and asked how many rounds it has had through it id say maybe 800 +. A s/s blast baffle would definitely stop that.

    Ideally an email should be sent to us and we can discuss this further sales@dpt.co.nz keeping in mind we are on holiday for two more weeks so I will reply as soon as I can

    Thank you
    DPT

    Looking at it more id actually lift that to over 1000 rounds. That is rather “baffling” with only 25 rounds through it
    Puffin, viper and Micky Duck like this.

  8. #8
    Member
    Join Date
    Apr 2012
    Location
    Kingcountry
    Posts
    4,909
    Mine has had 40 rounds 243 17" barrel plus 25 rounds 270 BAR 17" barrel
    Attached Images Attached Images  

  9. #9
    Member
    Join Date
    Mar 2018
    Location
    Turangi
    Posts
    1,373
    Quote Originally Posted by DPT View Post
    Looking at it more id actually lift that to over 1000 rounds. That is rather “baffling” with only 25 rounds through it
    Rifle was only purchased a month ago. With new suppressor supplied. It was flawless before first shots and out of 2 boxes of 20 rounds I have 16 left.

    I can supply date of purchase and from where if required.

  10. #10
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    24,822
    looks and sounds like sending it back to Darren with relevant detail is in order....Id bet Rushies left one it will come back betterer than new they have outstanding customer support,suspect someone slipped an old one on thinking you would never know.
    mikee and Cordite like this.

  11. #11
    Bah, humbug ! Frogfeatures's Avatar
    Join Date
    Nov 2013
    Location
    Auckland, until I can escape south....to Southland.
    Posts
    1,667
    My 243’s running a DPT, and I’ve probably put 200 + rounds through it.
    The first baffle looks a shit load better than yours.
    Maybe you got a ‘used’ baffle in error as MD says
    Very happy with mine
    Darren’ll see ya right, stands behind his product.
    He nui to ngaromanga, he iti to putanga.

    You depart with mighty boasts, but you come back having done little.
    Sounds like a typical hunting trip !

  12. #12
    Member
    Join Date
    Jun 2015
    Location
    Hamilton
    Posts
    1,268
    My 14inch 308 is holding up way better than that, i think the other chaps might be onto something and you have been given a second hand one without knowing?

  13. #13
    Terminator Products Kiwi Greg's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    6,688
    I would say looking at that Pic there is a hell of a lot of unburnt powder hitting that baffle courtesy of your short barrel & factory rounds

    I would always use a SS first baffle on a barrel that short especially with an over bore case like the 243.

    I bet plenty of Guys with "Bush Pigs" would fill their pants if they were able to look inside their suppressors...even with only a couple of boxes through them...

    As mentioned previously with a segmented can you can pull it to bits to see whats going on, with the others you need a bore scope to give yourself a fright
    tetawa, Danny and Mathias like this.
    Contact me for reloading components, brass, projectiles, powder, primers, etc

    http://terminatorproducts.co.nz/

    http://www.youtube.com/user/Terminat...?feature=guide

  14. #14
    DPT
    DPT is offline
    Member
    Join Date
    Mar 2012
    Location
    Hamilton
    Posts
    521
    Quote Originally Posted by Preacher View Post
    Rifle was only purchased a month ago. With new suppressor supplied. It was flawless before first shots and out of 2 boxes of 20 rounds I have 16 left.

    I can supply date of purchase and from where if required.
    Hi,

    Please email us sales@dpt.co.nz

    Thanks

  15. #15
    Member
    Join Date
    Mar 2018
    Location
    Turangi
    Posts
    1,373
    I am well aware it will require a s/s baffle and no it was perfect before first shots, definitely not substituted second hand component.

    Will contact dpt via email furthermore

 

 

Similar Threads

  1. Will xtra baffle change my POI
    By XBoltstalker in forum Shooting
    Replies: 5
    Last Post: 04-04-2017, 05:51 PM
  2. Baffle strike?
    By specweapon in forum Firearms, Optics and Accessories
    Replies: 26
    Last Post: 10-09-2016, 09:38 PM
  3. DPT Baffle Corrosion
    By LOC in forum Firearms, Optics and Accessories
    Replies: 43
    Last Post: 18-04-2016, 03:58 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!