Thread: Release agent

Yep it's interesting compromising on cure rates - wait until you try a winter product in the heat of summer. That's working fast haha.

One technique you can use is applying the epoxy to the bottom of the barrel as well as the center of the barrel channel. What you want is the excess getting squished up and out taking the air with it, and if you can contact the epoxy in the center under the barrel first it usually works all the voids and air pockets away and out. Looks are purely cosmetic if you have one or two little voids or a ripply patch, and don't forget about a little scratch up in a poor area and a quiet skim bedding. Won't likely make the bedding job perform better, but it makes you feel better about it haha.

Yea i think some of the resin pushed the dam back in the mag well and some of it went there. The sag is quite even both sides surprisingly and still supports under the chamber area so we will see how it goes.