Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Night Vision NZ Ammo Direct


User Tag List

+ Reply to Thread
Results 1 to 7 of 7
Like Tree1Likes
  • 1 Post By veitnamcam

Thread: Sako Ring Height Question

  1. #1
    Member
    Join Date
    Nov 2015
    Location
    Taupo
    Posts
    263

    Sako Ring Height Question

    I've tried searching and googling but keep getting a mix of advice and hoping that I can locate someone with a similar set up to advise on ring height for a Sako 85 Finnlight. Have a new to me 85 Finnlight on the way. Have a Kahles scope with 50mm objective and 1" tube. Looking at the Leupold ring mounts. Can anyone advise if the medium height will be tall enough? Or, if you have a 50mm objective scope on your Finnlight, do you know the measurements between the receiver and the scope tube? Can likely work it out with that data.

    Generally wouldn't be in a rush and would just await arrival and measure however have a trip booked and need to get things up and going ASAP so don't have time to send mounts back and forth or wait to measure.

  2. #2
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,972
    You will need the high.
    The med will just accommodate a 40mm objective.

    Sent from my SM-A320Y using Tapatalk
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  3. #3
    Gone But Not Forgotten
    Join Date
    Feb 2014
    Location
    Taupo
    Posts
    1,887
    The Sako Optilock Ringmount - not the separate base and ring Optilock, only comes in one height in either 1" or 30mm. There is no high Sako Optilock Ringmount. On my Sako 85 Black Bear .308 which has a heavier barrel than the Finnlight, the Ringmount has 5.5mm clearance for a Leupold 3.5-10x40. However, there is only 4mm of clearance between the breech part of the barrel and that scope.

    You have several other different brand mounting options for the Sako that would probably suit you better than Optilocks.

  4. #4
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,972
    Quote Originally Posted by 10-Ring View Post
    The Sako Optilock Ringmount - not the separate base and ring Optilock, only comes in one height in either 1" or 30mm. There is no high Sako Optilock Ringmount. On my Sako 85 Black Bear .308 which has a heavier barrel than the Finnlight, the Ringmount has 5.5mm clearance for a Leupold 3.5-10x40. However, there is only 4mm of clearance between the breech part of the barrel and that scope.

    You have several other different brand mounting options for the Sako that would probably suit you better than Optilocks.
    You are correct but he is asking about Leupold mounts of which there is a meduim and high but no low in 30mm.
    Medium wont mount his chosen scope but high will.
    @jakewire has some 30mm optilocks that will do the job.

    Sent from my SM-A320Y using Tapatalk
    10-Ring likes this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  5. #5
    Member
    Join Date
    Nov 2015
    Location
    Taupo
    Posts
    263
    Cheers guys. Ordered the medium and high leupold ring mounts so that I can try them both. Will post up results once I have time to install and check.

  6. #6
    Gone But Not Forgotten
    Join Date
    Feb 2014
    Location
    Taupo
    Posts
    1,887
    Quote Originally Posted by veitnamcam View Post
    You are correct but he is asking about Leupold mounts of which there is a meduim and high but no low in 30mm.
    Medium wont mount his chosen scope but high will.
    @jakewire has some 30mm optilocks that will do the job.

    Sent from my SM-A320Y using Tapatalk
    You're right Cam, my mistake. That's what happens when I use cheap Warehouse reading glasses instead of buying a decent pair.

  7. #7
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Cheers Cam but mine have been since sold.

    I'd put a rail on it then you can do whatever you want.
    Quis custodiet ipsos custodes?

 

 

Similar Threads

  1. T3 Talley ring height for 44mm objective scope.
    By spnz in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 09-11-2017, 11:02 PM
  2. Sako Optilock Ring Mounts height question
    By SlimySquirrel in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 19-10-2015, 07:14 AM
  3. Ring height hell
    By Timmay in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 23-08-2015, 04:13 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!