Thread: Swaro BT question

Thanks James, I will check it out.

Originally Posted by DaveE

The turrets we make do not require glue or even necessarily the interference fit to hold them in place. There is an o-ring on the underside of the Swarovski turret cap that fits on top of the turret. Once you tighten the turret cap down, this o-ring grips onto the turret ring we build and prevents it from spinning on the trimmed down dot ring. By trimming the dot projection off the BT dot rings and fitting our turrets over them, it allows us to have a clean finish on the turret ring and provides more space for data on the turret, particularly with the 2 revolution turrets.

Are pics possible?
Thanks

so let me get this straight.
The trademe guy can make a custom ring but in moa or also MILIradians???? thats the part that grabs me.
Can someone link me to one of his auctions?
Oh i see its Dave above ^^
cheers

Originally Posted by ANTSMAN

so let me get this straight.
The trademe guy can make a custom ring but in moa or also MILIradians???? thats the part that grabs me.
Can someone link me to one of his auctions?
Oh i see its Dave above ^^
cheers

Hey there, it depends on what scope model you have for whether they accept MOA or MRAD. The Z3s and Z5s are MOA. The Z6s are all MRAD as far as I am aware. You cant put an MOA on an MRAD scope and expect it to work and visa versa.


Sent from my iPhone using Tapatalk

Originally Posted by Tahr

Are pics possible?
Thanks

I will try and post some pics on here later on when at computer if it will let me.


Sent from my iPhone using Tapatalk

If you want to see how to install our turrets, look here. https://vimeo.com/341274021
How to remove the factory zero stop is here. https://vimeo.com/339803533
The scope the demo is done on is a Z6 but it is the exact same process for the Z3 & Z5. The MOA 2 rev turret that is shown in the how to remove the zero stop vid will not work on the Z6, was just to show the process.


Sent from my iPhone using Tapatalk

I got and fitted one of those turret rings from trademe for a friends scope. They work great. The one thing I’d do different than what he suggested, which I don’t think he has worked out is that the ring will fit down over the bottom ring with the marks on it. You then place on of the 3 rings on top before fitting the cap. This does away with 3 lines of marks and if you have a z3 or z5 that has mil marks on a moa scope it makes it look better. No cutting bits off the old rings. Gives you a red dot for when on zero.

Haha, we have considered that and more. Have a prototype at the anodisers now that will do away with the dot ring altogether and give us more area for data to be engraved. It fits over the bottom of the coupling like you say but is full height to the underside of the cap. So no dot ring mods needed


Sent from my iPhone using Tapatalk

Hey guys, we have just launched our website selling these turrets worldwide and are offering free shipping within NZ & AU. Our pricing is a bit different to what we have previously listed on Trademe. Stock single revolution turrets are reduced to NZD$139.99 Stock dual revolution turrets are NZD$149.99 and customs are now NZD$159.99.


Sent from my iPhone using Tapatalk

Originally Posted by DaveE

Hey guys, we have just launched our website selling these turrets worldwide and are offering free shipping within NZ & AU. Our pricing is a bit different to what we have previously listed on Trademe. Stock single revolution turrets are reduced to NZD$139.99 Stock dual revolution turrets are NZD$149.99 and customs are now NZD$159.99.


Sent from my iPhone using Tapatalk

www.customscopeturrets.com


Sent from my iPhone using Tapatalk

Bit of free publicity for @DaveE his custom turret caps are a game changer one of the things that puts people off the swaros is there lack of elevation adjustment. These caps unlock the full potential of these scopes and he’s a good bastard to deal with


Sent from my iPhone using Tapatalk

Yeap, got one of Dave's rings on my Z5 now. I had a proper Swarovski MOA ring on my last Z5 but this is much better with the option to remove zerostop and run two revolutions, especially on the rainbow trajectory 308 Haha

Surely he owes a discount for our product testing and reviews?

Thanks guys for the positive feedback


Sent from my iPhone using Tapatalk