I have had the idea of putting a brake inside a suppressor for a year or two but didn't really have anything small enough to try to make it work.
After making the T1 Terminator and see how amazingly efficient it was for it's size I figured out a way of putting it all together to see if it would work.
I had a rifle with a suitable calibre so I got it re-threaded to suit the T1 loaded some bullets & carefully tested it.
Here is the video I made yesterday, with the T1 inside a suppressor compared to a standard suppressor.
I made a video last week with the results of putting a sleeve over the T1 to simulate it in a closed off state to see if there was any recoil reduction available from doing this.
PS please be very careful if you put anything other than insulation tape etc around the outside of a muzzle brake, the forces are enormous.
Bookmarks