Thread: Unpleasant surprises when removing a scope

Originally Posted by Scouser

'If you cant fix it with a hammer'....then your hammer wasn't big enough in the first place!!!!!!!

if you cant fix it with a hammer its an electrical problem.

Originally Posted by sneeze

With a few exceptions scope tubes are alloy and if you tighten them up enough they will crush. Some mounts will let you get away with a bit of overtightning others will bite you in the arse. I use a W&B torque wrench and use 15 ish inch pounds max but got lazy a whie ago and crushed a vortex diamondback. Verticle split rings are the worst but still my fault. Best thing was I owned up and vortex just repalced the scope totally free, not even charging for freight.

That's bloody good service!

um Im ham fisted and just crushed your scope

No worries we will give you another as long as you are more careful in the future.

Something like that?

Sent from my GT-S5360T using Tapatalk 2

Originally Posted by veitnamcam

That's bloody good service!

um Im ham fisted and just crushed your scope

No worries we will give you another as long as you are more careful in the future.

Something like that?

Sent from my GT-S5360T using Tapatalk 2

yeah pretty much.
Hey vortex your scope is paralex fee at 50yds its advertised at being 100
oh terribly sorry sir that must be a fault, please send it back
hey vortex just pulled the scope and I ma dick (more so cos the torque wrench is sitting on the bench within reach)
Vortex:no worries we will send you a new one with some instructions on how to pick up a torque wrench